component
TL072G-D08-T
Public Made by Adomby adom
UTC(Unisonic Tech) Operational Amplifier, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL072G-D08-T
UTC(Unisonic Tech) · Operational Amplifier · DIP-8
TL072G-D08-T from UTC(Unisonic Tech), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT 1 | output | Output of amplifier 1, short-circuit protected with infinite duration to ground or either supply. |
| 2 | INVERTING INPUT 1 | input | Inverting J-FET input of amplifier 1, input voltage must not exceed ±15 V or the supply magnitude. |
| 3 | NON-INVERTING INPUT 1 | input | Non-inverting J-FET input of amplifier 1, input voltage must not exceed ±15 V or the supply magnitude. |
| 4 | VCC- | power_in | Negative supply voltage, supply total rated up to ±18 V maximum. |
| 5 | NON-INVERTING INPUT 2 | input | Non-inverting J-FET input of amplifier 2, input voltage must not exceed ±15 V or the supply magnitude. |
| 6 | INVERTING INPUT 2 | input | Inverting J-FET input of amplifier 2, input voltage must not exceed ±15 V or the supply magnitude. |
| 7 | OUTPUT 2 | output | Output of amplifier 2, short-circuit protected with infinite duration to ground or either supply. |
| 8 | VCC+ | power_in | Positive supply voltage, supply rated up to ±18 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UTC(Unisonic Tech) |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -18 | 18 | V | TA=25C | 3 | |
| Input Voltage | VIN | -15 | 15 | V | TA=25C | 3 | |
| Differential Input Voltage | VI(DIFF) | -30 | 30 | V | TA=25C | 3 | |
| Power Dissipation | PD | 680 | mW | TA=25C | 3 | ||
| Operating Temperature | TOPR | 0 | 70 | C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | C | 3 | ||
| Input Offset Voltage | VI(OFF) | 3 | 10 | mV | RS=50, TA=25C | 4 | |
| Input Offset Voltage | VI(OFF) | 13 | mV | RS=50, TMIN≦TA≦TMAX | 4 | ||
| Input Offset Current | II(OFF) | 5 | 100 | pA | TA=25C | 4 | |
| Input Offset Current | II(OFF) | 10 | nA | TMIN≦TA≦TMAX | 4 | ||
| Input Bias Current | II(BIAS) | 20 | 200 | pA | TA=25C | 4 | |
| Input Bias Current | II(BIAS) | 20 | nA | TMIN≦TA≦TMAX | 4 | ||
| Input Common Mode Voltage | VI(CM) | -11 | 11 | V | 4 | ||
| Output Voltage Swing | VO(SW) | 10 | 12 | V | RL=2k, TA=25C | 4 | |
| Output Voltage Swing | VO(SW) | 12 | 13.5 | V | RL=10k, TA=25C | 4 | |
| Output Voltage Swing | VO(SW) | 10 | V | RL=2k, TMIN≦TA≦TMAX | 4 | ||
| Output Voltage Swing | VO(SW) | 12 | V | RL=10k, TMIN≦TA≦TMAX | 4 | ||
| Large Signal Voltage Gain | Avd | 25 | 200 | V/mV | RL=10k, VOUT=±10V, TA=25C | 4 | |
| Large Signal Voltage Gain | Avd | 15 | V/mV | RL=10k, VOUT=±10V, TMIN≦TA≦TMAX | 4 | ||
| Gain Bandwidth Product | GBW | 2.5 | 4 | MHz | TA=25C, RL=10k, CL=100pF | 4 | |
| Common Mode Rejection Ratio | CMR | 70 | 86 | dB | RS=50, TA=25C | 4 | |
| Common Mode Rejection Ratio | CMR | 70 | dB | RS=50, TMIN≦TA≦TMAX | 4 | ||
| Supply Voltage Rejection Ratio | SVR | 70 | 86 | dB | RS=50, TA=25C | 4 | |
| Supply Voltage Rejection Ratio | SVR | 70 | dB | RS=50, TMIN≦TA≦MAX | 4 | ||
| Supply Current | ICC | 1.4 | 2.5 | mA | No load, TA=25C | 4 | |
| Supply Current | ICC | 2.5 | mA | No load, TMIN≦TA≦TMAX | 4 | ||
| Output Short-circuit Current | Ios | 10 | 40 | 60 | mA | TA=25C | 4 |
| Output Short-circuit Current | Ios | 10 | 60 | mA | TMIN≦TA≦TMAX | 4 | |
| Slew Rate | SR | 8 | 16 | V/μs | VIN=10V, RL=2k, CL=100pF, unity gain | 4 | |
| Temperature Coefficient of Input Offset Voltage | ∆VI(OFF) | 10 | μV/C | RS=50 | 4 | ||
| Input Resistance | RIN | 1012 | 4 | ||||
| Channel Separation | V01/V02 | 120 | dB | GV=100 | 4 | ||
| Rise Time | tR | 0.1 | μs | VIN=20mV, RL=2k, CL=100pF, unity gain | 4 | ||
| Overshoot Factor | Kov | 10 | % | VIN=20mV,RL=2k,CL=100pF, unity gain | 4 | ||
| Total Harmonic Distortion | THD | 0.01 | % | GV=20dB, f=1kHz, RL=2k, CL=100pF, VOUT=2Vpp | 4 | ||
| Phase Margin | m | 45 | Degrees | 4 | |||
| Equivalent Input Noise Voltage | eN | 15 | nV/√Hz | RS=100, f=1KHz | 4 |
CAD (KiCad official)
- Symbol:
TL072G-D08-T - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
tl072g-d08-t-etched.step/tl072g-d08-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl072g-d08-t.step/tl072g-d08-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UTC(Unisonic Tech) datasheet (8 pp, sha256
98c6388a730a283a, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).