Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1619-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-20-300mil

PIC16F1619-I from Microchip Tech, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; the PIC16F1619 operating voltage range is 2.3V to 5.5V (1.8V to 3.6V applies to the PIC16LF1619).
2 RA5 bidirectional General purpose I/O with CMOS/open-drain output, also CLKIN external clock input (EC mode), T1CKI, T2IN, and SMTWIN1; has interrupt-on-change and weak pull-up.
3 RA4 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN3, T1G, SMTSIG1, and CLKOUT (FOSC/4 output); has interrupt-on-change and weak pull-up.
4 RA3 input Input-only general purpose pin with interrupt-on-change and weak pull-up, which is also the MCLR Master Clear input (internal pull-up) and the VPP programming voltage (HV) input.
5 RC5 bidirectional General purpose I/O with CMOS/open-drain output, also T3CKI, CCP1, RX, and ATIN, and high current drive (HIC5, up to 100mA when enabled via HIDRVC).
6 RC4 bidirectional General purpose I/O with CMOS/open-drain output, also T3G, CLCIN1, and high current drive (HIC4, up to 100mA when enabled via HIDRVC).
7 RC3 input General purpose input with interrupt-on-change and weak pull-up, also ADC channel AN7, comparator C1IN3-/C2IN3- inputs, T5G, CCP2, CLCIN0, and ATCC.
8 RC6 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN8 and SPI slave select SS.
9 RC7 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN9.
10 RB7 bidirectional General purpose I/O with CMOS/open-drain output, also EUSART synchronous clock CK; has interrupt-on-change.
11 RB6 bidirectional General purpose I/O with CMOS/open-drain output, also SPI clock SCK; has interrupt-on-change.
12 RB5 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN11 and EUSART asynchronous input RX; has interrupt-on-change.
13 RB4 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN10 and SPI data input SDI; has interrupt-on-change.
14 RC2 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN6 and comparator negative inputs C1IN2-/C2IN2-.
15 RC1 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN5, comparator negative inputs C1IN1-/C2IN1-, T4IN, CLCIN2, and SMTSIG2.
16 RC0 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN4, comparator positive input C2IN+, and T5CKI.
17 RA2 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN2, T0CKI, CWG1IN, ZCD1IN, and external interrupt INT; has interrupt-on-change.
18 RA1 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN1, VREF+, comparator negative inputs C1IN0-/C2IN0-, and ICSPCLK programming clock; has interrupt-on-change.
19 RA0 bidirectional General purpose I/O with CMOS/open-drain output, also ADC channel AN0, comparator positive input C1IN+, DAC1OUT, and ICSPDAT programming data I/O; has interrupt-on-change.
20 VSS power_in Ground reference for the device.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-20-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VDD pin with respect to VSS (PIC16F1615/9) -0.3 6.5 V 522
Voltage on MCLR pin with respect to VSS -0.3 9 V 522
Voltage on all other pins with respect to VSS (max VDD + 0.3V) -0.3 V 522
Ambient temperature under bias -40 125 °C 522
Storage temperature -65 150 °C 522
Maximum current on VDD pin 250 mA -40°C ≤ TA ≤ +85°C 522
Maximum current on VDD pin 85 mA +85°C ≤ TA ≤ +125°C 522
Sunk by any standard I/O pin 50 mA 522
Sourced by any standard I/O pin 50 mA 522
Sunk by any High Current I/O pin 100 mA 522
Sourced by any High Current I/O pin 100 mA 522
Clamp current, IK IK 20 mA VPIN < 0 or VPIN > VDD 522
VDD Operating Supply Voltage (PIC16F, FOSC ≤ 16 MHz) VDD 2.3 5.5 V FOSC ≤ 16 MHz 525
VDD Operating Supply Voltage (PIC16F, FOSC ≤ 32 MHz) VDD 2.5 5.5 V FOSC ≤ 32 MHz 525
Operating Ambient Temperature Range (Industrial) TA -40 85 °C Industrial temperature 523
External CLKIN Frequency (External Clock ECH) FOSC 32 MHz External Clock (ECH) 535
RAM Data Retention Voltage (PIC16F) VDR 1.7 V Device in Sleep mode 525
VDD Rise Rate SVDD 0.05 V/ms Ensures that the Power-on Reset signal is released properly 525
Input Low Voltage, I/O PORT with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 531
Input Low Voltage, I/O PORT (1.8V ≤ VDD ≤ 4.5V) VIL 0.15 VDD 1.8V ≤ VDD ≤ 4.5V 531
Input Low Voltage, I/O PORT with Schmitt Trigger buffer (max = 0.2 VDD) VIL 0.2 VDD 2.0V ≤ VDD ≤ 5.5V 531
Input Low Voltage, MCLR (max = 0.2 VDD) VIL 0.2 VDD 531
Input High Voltage, I/O PORT with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 531
Input High Voltage, I/O PORT with Schmitt Trigger buffer (min = 0.8 VDD) VIH 0.8 VDD 2.0V ≤ VDD ≤ 5.5V 531
Input High Voltage, MCLR (min = 0.8 VDD) VIH 0.8 VDD 531
Input Leakage Current, I/O Ports IIL -125 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 531
Input Leakage Current, I/O Ports IIL -1000 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C 531
Input Leakage Current, MCLR IIL -200 200 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 531
Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 531
Weak Pull-up Current IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 531
Output Low Voltage, I/O Ports VOL 0.6 V IOL = 8.0 mA, VDD = 5.0V 531
Pin Capacitance, All I/O pins CIO 50 pF 531
Supply Current (IDD), FOSC = 32 MHz HFINTOSC IDD 1.6 5 mA VDD = 3.0V 528
Supply Current (IDD), FOSC = 32 MHz HFINTOSC IDD 1.9 6 mA VDD = 5.0V 528
Power-down Current (IPD), Base, Low-Power Sleep mode IPD 0.3 4 µA VDD = 3.0V, WDT, BOR, FVR disabled, all peripherals inactive, max at +85°C 529
Programming Supply Voltage VDD for Bulk Erase VBE 2.7 V 532
Supply Current during Programming IDDP 10 mA 532
Cell Endurance (Program Flash) EP 10 K E/W -40°C ≤ TA ≤ +85°C (Note 1) 532
High-Endurance Flash Cell Endurance EHEFC 100 K E/W 0°C ≤ TA ≤ +60°C, lower byte last 128 addresses 532
Self-timed Write Cycle Time TIW 2 2.5 ms 532
Voltage on MCLR/VPP pin (programming) VIHH 8 9 V Required only if single-supply programming is disabled (Note 2) 532
Input Offset Error, ADC (EOFF) ... integral error (EIL) EIL -1.7 1.7 LSb VREF = 3.0V 542
ADC Offset Error (EOFF) EOFF -2.5 2.5 LSb VREF = 3.0V 542
ADC Gain Error (EGN) EGN -2 2 LSb VREF = 3.0V 542
ADC Reference Voltage (VREF) VREF 1.8 V VREF = (VRPOS - VRNEG) 542
ADC Clock Period (TADC), FOSC-based TAD 1 6 µs FOSC-based 544
Comparator Input Offset Voltage Vioff -60 60 mV CxSP = 1, Vicm = VDD/2 544
Comparator Input Common Mode Voltage Vicm 0 V 544
Comparator Response Time, Rising Edge Tresp 400 800 ns CxSP = 1 544
DAC Absolute Accuracy CACC -1.5 1.5 LSb 545
Brown-out Reset Voltage, BORV = 1 (PIC16F1615/9) VBOR 2.35 2.45 2.58 V BORV = 1 (PIC16F1615/9) 540
Brown-out Reset Voltage, BORV = 0 VBOR 2.55 2.7 2.85 V BORV = 0 540
Power-up Timer Period TPWRT 40 65 140 ms PWRTE = 0 540
Thermal Resistance Junction to Ambient (20-pin SOIC) θJA 77.7 C/W 20-pin SOIC package 533
Thermal Resistance Junction to Case (20-pin SOIC) θJC 23.1 C/W 20-pin SOIC package 533
Maximum Junction Temperature TJMAX 150 °C 533

CAD (KiCad official)

  • Symbol: PIC16F1619-I
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f1619-i-etched.step / pic16f1619-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1619-i.step / pic16f1619-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (597 pp, sha256 b5940fb117ef7172, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF