Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

THS3092DDAR

Texas Instruments · Operational Amplifier · SOP-8-EP

THS3092DDAR from Texas Instruments, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1VOUT output Output of amplifier channel 1; it drives the load and is subject to the output voltage swing of ±12.5 V at RL = 100 Ω and VS = ±15 V, and the output current limits listed in the electrical characteristics.
2 1VIN- input Inverting input of amplifier channel 1, a current-feedback input whose input resistance is 30 Ω typical and which should be kept at a low parasitic capacitance (1.4 pF typical).
3 1VIN+ input Noninverting input of amplifier channel 1, with a common-mode input range of ±13 V minimum at VS = ±15 V and ±3 V minimum at VS = ±5 V.
4 VS- power_in Negative power supply; the specified operating voltage is ±5 V to ±15 V dual supply or 10 V to 30 V single supply, with absolute maximum supply voltage of 33 V total from VS- to VS+.
5 2VIN+ input Noninverting input of amplifier channel 2, with a common-mode input range of ±13 V minimum at VS = ±15 V and ±3 V minimum at VS = ±5 V.
6 2VIN- input Inverting input of amplifier channel 2, a current-feedback input whose input resistance is 30 Ω typical and which should be kept at a low parasitic capacitance (1.4 pF typical).
7 2VOUT output Output of amplifier channel 2; it drives the load and is subject to the output voltage swing of ±12.5 V at RL = 100 Ω and VS = ±15 V, and the output current limits listed in the electrical characteristics.
8 VS+ power_in Positive power supply; the specified operating voltage is ±5 V to ±15 V dual supply or 10 V to 30 V single supply, with absolute maximum supply voltage of 33 V total from VS- to VS+.
9 PowerPAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-8-EP
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Transimpedance (±15 V) 300 kΩ VS = ±15 V; VO = ±7.5 V, Gain = 1; -40°C to 85°C 4
Input offset voltage (±15 V) 4 mV VS = ±15 V; -40°C to 85°C 4
Noninverting input bias current (±15 V) 20 µA VS = ±15 V; VCM = 0 V; -40°C to 85°C 4
Inverting input bias current (±15 V) 20 µA VS = ±15 V; VCM = 0 V; -40°C to 85°C 4
Input offset current (±15 V) 15 µA VS = ±15 V; -40°C to 85°C 4
Common-mode input range (±15 V) 13 V VS = ±15 V; -40°C to 85°C; printed as ±13 V 4
Common-mode rejection ratio (±15 V) 65 dB VS = ±15 V; VCM = ±10 V; -40°C to 85°C 4
Output voltage swing, RL = 1 kΩ (±15 V) 12.5 V VS = ±15 V; RL = 1 kΩ; -40°C to 85°C; printed as ±12.5 V 5
Output voltage swing, RL = 100 Ω (±15 V) 11.8 V VS = ±15 V; RL = 100 Ω; -40°C to 85°C; printed as ±11.8 V 5
Output current sourcing (±15 V) 200 mA VS = ±15 V; RL = 40 Ω; -40°C to 85°C 5
Output current sinking (±15 V) 175 mA VS = ±15 V; RL = 40 Ω; -40°C to 85°C 5
Specified operating voltage (±15 V) 16 V -40°C to 85°C 5
Maximum quiescent current (±15 V) 11 mA VS = ±15 V; per channel; -40°C to 85°C 5
Minimum quiescent current (±15 V) 8 mA VS = ±15 V; per channel; -40°C to 85°C 5
Power supply rejection +PSRR (±15 V) 65 dB VS+ = 15.5 V to 14.5 V, VS- = 15 V; -40°C to 85°C 5
Power supply rejection -PSRR (±15 V) 65 dB VS+ = 15 V, VS- = -15.5 V to -14.5 V; -40°C to 85°C 5
Transimpedance (±5 V) 200 kΩ VS = ±5 V; VO = ±2.5 V, Gain = 1; -40°C to 85°C 6
Input offset voltage (±5 V) 3 mV VS = ±5 V; -40°C to 85°C 6
Noninverting input bias current (±5 V) 20 µA VS = ±5 V; VCM = 0 V; -40°C to 85°C 6
Inverting input bias current (±5 V) 20 µA VS = ±5 V; VCM = 0 V; -40°C to 85°C 6
Input offset current (±5 V) 15 µA VS = ±5 V; -40°C to 85°C 6
Common-mode input range (±5 V) 3 V VS = ±5 V; -40°C to 85°C; printed as ±3 V 6
Common-mode rejection ratio (±5 V) 57 dB VS = ±5 V; VCM = ±2.0 V, VO = 0 V; -40°C to 85°C 6
Output voltage swing, RL = 1 kΩ (±5 V) 2.8 V VS = ±5 V; RL = 1 kΩ; -40°C to 85°C; printed as ±2.8 V 7
Output voltage swing, RL = 100 Ω (±5 V) 2.5 V VS = ±5 V; RL = 100 Ω; -40°C to 85°C; printed as ±2.5 V 7
Output current sourcing (±5 V) 140 mA VS = ±5 V; RL = 10 Ω; -40°C to 85°C 7
Output current sinking (±5 V) 125 mA VS = ±5 V; RL = 10 Ω; -40°C to 85°C 7
Specified operating voltage (±5 V) 4.5 V -40°C to 85°C 7
Maximum quiescent current (±5 V) 9.5 mA VS = ±5 V; per channel; -40°C to 85°C 7
Minimum quiescent current (±5 V) 6.5 mA VS = ±5 V; per channel; -40°C to 85°C 7
Power supply rejection +PSRR (±5 V) 63 dB VS+ = 5.5 V to 4.5 V, VS- = -5 V; -40°C to 85°C 7
Power supply rejection -PSRR (±5 V) 60 dB VS+ = 5 V, VS- = -4.5 V to 5.5 V; -40°C to 85°C 7
Dual supply voltage 5 15 V 3
Single supply voltage 10 30 V 3
Operating free-air temperature TA -40 85 °C 3
Supply voltage, VS- to VS+ VS 33 V 3
Differential input voltage VID -4 4 V printed as ±4 V 3
Output current IO 350 mA 3
Maximum junction temperature TJ 150 °C 3
Maximum junction temperature, continuous operation TJ 125 °C continuous operation, long-term reliability 3
Storage temperature Tstg -65 150 °C 3
Lead temperature 300 °C 1.6 mm (1/16 inch) from case for 10 seconds 3
Junction-to-case thermal resistance ΘJC 9.2 °C/W DDA-8 package 2
Junction-to-ambient thermal resistance ΘJA 45.8 °C/W DDA-8 package; JEDEC High-K test PCB 2

CAD (KiCad official)

  • Symbol: THS3092DDAR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: ths3092ddar-etched.step / ths3092ddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths3092ddar.step / ths3092ddar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 958b7fe7861b0c26, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF