component
MPC3120R-GV
Public Made by Adomby adom
miracle Gate Drive Optocoupler, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMPC3120R-GV
miracle · Gate Drive Optocoupler · DIP-8
MPC3120R-GV from miracle, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | Anode | passive | LED anode input; recommended on-state input current is 7 mA to 16 mA, with absolute maximum forward current of 25 mA. |
| 3 | Cathode | passive | LED cathode input; reverse voltage must not exceed 5 V, and the off-state input voltage is 0 V to 0.8 V. |
| 4 | NC | unconnected | No internal connection. |
| 5 | GND | power_in | Output-side ground (VEE=GND) reference for the gate driver output stage. |
| 6 | VO | output | Gate driver output, rail-to-rail, with peak output current of 2.5 A and maximum output voltage of 35 V. |
| 7 | VO | output | Gate driver output, rail-to-rail, with peak output current of 2.5 A and maximum output voltage of 35 V. |
| 8 | VCC | power_in | Positive supply for the output stage, recommended 15 V to 30 V with absolute maximum of 35 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | miracle |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Current | IF | 25 | mA | 2 | |||
| Peak Forward Current | IFP | 50 | mA | 50% duty, 1ms P.W | 2 | ||
| Peak Transient Current | IF(trans) | 1 | A | ≤1μs P.W, 300pps | 2 | ||
| Operating Frequency | f | 50 | kHz | 2 | |||
| Reverse Voltage | VR | 5 | V | 2 | |||
| Input Power Dissipation | PI | 100 | mW | 2 | |||
| Supply Voltage | VCC | 35 | V | 2 | |||
| Output Voltage | VO | 35 | V | 2 | |||
| Peak Output Current | IO | 2.5 | A | 2 | |||
| Output Power Dissipation | PO | 250 | mW | 2 | |||
| Total Power Dissipation | Ptot | 295 | mW | 2 | |||
| Isolation Voltage | Viso | 5000 | Vrms | AC For 1 Minute, R.H. = 40 ~ 60% | 2 | ||
| Operating Temperature | Topr | -55 | 100 | °C | 2 | ||
| Storage Temperature | Tstg | -55 | 125 | °C | 2 | ||
| Soldering Temperature | Tsol | 260 | °C | For 10 seconds | 2 | ||
| Operating Temperature | TA | -40 | 100 | °C | 3 | ||
| Supply Voltage | VCC | 15 | 30 | V | 3 | ||
| Input Current (ON) | IF(ON) | 7 | 16 | mA | 3 | ||
| Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 3 | ||
| Forward Voltage | VF | 1.38 | 1.8 | V | IF=10mA | 3 | |
| Reverse Current | IR | 10 | μA | VR=5V | 3 | ||
| Input Capacitance | Cin | 13 | pF | V=0, f=1MHz | 3 | ||
| High Level Supply Current | ICCH | 1.66 | 3 | mA | IF= 7mA to 10mA, VO= Open | 3 | |
| Low Level Supply Current | ICCL | 1.8 | 3 | mA | VF = 0 to 0.8V, VO= Open | 3 | |
| High Level Output Current | IOPH | -1 | A | VO= VCC-1.5V | 3 | ||
| High Level Output Current | IOPH | -2.5 | A | VO= VCC-4V | 3 | ||
| Low Level Output Current | IOPL | 1 | A | VO= VEE+1.5V | 3 | ||
| Low Level Output Current | IOPL | 2.5 | A | VO= VEE+4V | 3 | ||
| Input Threshold Current | IFLH | 2.38 | 5 | mA | IO= 0mA, VO> 5V | 3 | |
| Input Threshold Voltage | VFHL | 0.8 | V | IO= 0mA, VO< 5V | 3 | ||
| Under Voltage Lockout Threshold | VUVLO+ | 11 | 13.01 | 13.5 | V | IO= 10mA, VO> 5V | 3 |
| Under Voltage Lockout Threshold | VUVLO- | 9.5 | 11.01 | 12 | V | IO= 10mA, VO< 5V | 3 |
| Floating Capacitance | CIO | 1 | pF | V=0, f=1MHz | 3 | ||
| Propagation Delay Time to Output Low Level | TPHL | 50 | 103 | 500 | ns | IF= 7 to 16mA, CL= 10nF, RL= 10Ω, f= 10kHz, Duty = 50%, TA= 25 °C | 4 |
| Propagation Delay Time to Output High Level | TPLH | 50 | 83 | 500 | ns | IF= 7 to 16mA, CL= 10nF, RL= 10Ω, f= 10kHz, Duty = 50%, TA= 25 °C | 4 |
| Pulse Width Distortion | /TPHL-TPLH/ | 20 | 200 | ns | 4 | ||
| Propagation Delay Skew | tPSK | -100 | 100 | ns | 4 | ||
| Rise Time | tr | 13 | ns | 4 | |||
| Fall Time | tf | 13 | ns | 4 | |||
| UVLO Turn On Delay | tUVLO(ON) | 1.6 | μs | IF= 10mA, VO> 5V | 4 | ||
| UVLO Turn Off Delay | tUVLO(OFF) | 0.4 | μs | IF= 10mA, VO< 5V | 4 | ||
| Common Mode Transient Immunity at Logic High | CMH | -20 | kV/μs | IF=7 to16mA, VCC=30V,TA=25 °C, VCM= 2kV | 4 | ||
| Common Mode Transient Immunity at Logic Low | CML | 20 | kV/μs | IF=0mA, VCC= 30V, RL, TA= 25 °C, VCM= 2kV | 4 |
CAD (KiCad official)
- Symbol:
MPC3120R-GV - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
mpc3120r-gv-etched.step/mpc3120r-gv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpc3120r-gv.step/mpc3120r-gv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: miracle datasheet (18 pp, sha256
9405c234becb12ea, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).