component

MT6502CT-ADD

Public Unreviewed

by Ray

Magn Tek Magnetic Angle Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentmagnetic sensorsmt6502ct-add
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

MT6502CT-ADD

Magn Tek · Magnetic Angle Sensors · SOP-8

MT6502CT-ADD from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in 5V power supply input. Operating range 4.5-5.5V (typ 5.0V). Absolute max +/-30V with reverse-polarity/overvoltage protection. Typical IDD 6 mA (max 9 mA).
2 CSN input SPI chip-select input (active low) for the 3-wire SPI interface used to access internal registers and EEPROM. Digital I/O rated to 6.5V absolute max.
3 SWO output Switch Output (SWO): programmable angular switch output. Switch point and hysteresis window are user-programmable. Enabled/disabled via the 'Switch Output Enable' register.
4 SCK input SPI clock input for the 3-wire SPI programming interface.
5 OUT bidirectional Multi-function output pin: analog voltage (ratiometric to VDD), PWM output (NMOS open-drain, 122/244/488/976 Hz programmable), or single-wire OWI communication. Selected by the 'Output Mode' register. Absolute max -0.3 to 18V; short-circuit protected (25 mA to GND/VDD).
6 SDAT bidirectional SPI data (bidirectional) line for the 3-wire SPI interface used to read/write internal registers and EEPROM.
7 TEST input MagnTek factory test pin. Reserved for manufacturer use only. Should be left unconnected or handled per manufacturer guidance in normal application.
8 VSS power_in Ground reference (0V) for the chip.

Key specifications

Parameter Value
Manufacturer Magn Tek
Package SOP-8
Category Magnetic Sensors
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MT6502CT-ADD-R
  • MT6502GT-ADD-R

CAD (KiCad official)

  • Symbol: MT6502CT-ADD
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Magn Tek datasheet (24 pp, sha256 3bf4a7148935071b, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF