component
NCV809SN293D2T1G
Public Made by Adomby adom
onsemi Supervisor And Reset ICs, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCV809SN293D2T1G
onsemi · Supervisor And Reset ICs · SOT-23-3
NCV809SN293D2T1G from onsemi, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the device (pin description table states only 'Ground'). |
| 2 | RESET | output | For the MAX809 (active-low) RESET output, the pin stays low while VCC is below the reset voltage threshold and for a reset timeout period (140-460 ms for this part's ordering entry... see review) after VCC rises above the reset threshold; the output is CMOS and is valid down to VCC = 1.0 V. |
| 3 | VCC | power_in | Supply voltage input; the absolute maximum rating for VCC to GND is -0.3 V to 6.0 V and the VCC range in the electrical characteristics is 1.2 V to 5.5 V for TA = -40 °C to +105 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage (VCC to GND) | VCC | -0.3 | 6 | V | 3 | ||
| Input Current, VCC | 20 | mA | 3 | ||||
| Output Current, RESET | 20 | mA | 3 | ||||
| dV/dt (VCC) | dV/dt | 100 | V/sec | 3 | |||
| RESET Output Voltage (CMOS) | -0.3 | V | 3 | ||||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Lead Temperature (Soldering) | Tsol | 260 | °C | Soldering, 10 seconds | 3 | ||
| ESD Protection Human Body Model | 2000 | V | HBM, JESD22-A114 | 3 | |||
| ESD Protection Machine Model | 200 | V | MM, JESD22-A115 | 3 | |||
| Latchup Current, Positive | ILatchup | 200 | mA | Positive, JESD78 Class II | 3 | ||
| Latchup Current, Negative | ILatchup | 200 | mA | Negative, JESD78 Class II | 3 | ||
| VCC Range | 1 | 5.5 | V | TA = 0°C to +70°C | 4 | ||
| VCC Range | 1.2 | 5.5 | V | TA = −40°C to +105°C (Note 4) | 4 | ||
| Supply Current | ICC | 0.5 | 1.2 | A | VCC = 3.3 V, TA = −40°C to +85°C | 4 | |
| Supply Current | ICC | 2 | A | VCC = 3.3 V, TA = 85°C to +105°C (Note 5) | 4 | ||
| Supply Current | ICC | 0.8 | 1.8 | A | VCC = 5.5 V, TA = −40°C to +85°C | 4 | |
| Supply Current | ICC | 2.5 | A | VCC = 5.5 V, TA = 85°C to +105°C (Note 5) | 4 | ||
| Reset Threshold (Vin Decreasing), MAX8xxSTR / MAX8xxSQ293 row (2.93 V) | VTH | 2.89 | 2.93 | 2.96 | V | TA = +25°C | 4 |
| Reset Threshold (Vin Decreasing), MAX8xxSTR / MAX8xxSQ293 row (2.93 V) | VTH | 2.85 | 3 | V | TA = −40°C to +85°C | 4 | |
| Reset Threshold (Vin Decreasing), MAX8xxSTR / MAX8xxSQ293 row (2.93 V) | VTH | 2.78 | 3.08 | V | TA = +85°C to +105°C (Note 5) | 4 | |
| Reset Active TimeOut Period, MAX8xxSN(Q)293D2 | tRP | 20 | 66 | msec | 5 | ||
| RESET Output Voltage Low (No Load) (MAX809) | VOL | 0.3 | V | VCC = VTH − 0.2 V; 2.1 V ≤ VTH ≤ 4.0 V, ISINK = 1.2 mA | 5 | ||
| Detector Voltage Threshold Temperature Coefficient | 30 | ppm/°C | 5 | ||||
| VCC to Reset Delay | 10 | sec | VCC = VTH to (VTH − 100 mV) | 5 | |||
| Thermal Resistance, Junction-to-Air, SOT-23 | RJA | 301 | °C/W | Note 1 (35x35x1.6 mm FR4, 10 mm² 1 oz copper, natural convection) | 3 |
CAD (KiCad official)
- Symbol:
NCV809SN293D2T1G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
ncv809sn293d2t1g-etched.step/ncv809sn293d2t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv809sn293d2t1g.step/ncv809sn293d2t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
3108762742ccf336, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).