Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP38858S-1.2

Texas Instruments · Linear Voltage Regulators (LDO) · TO-263-5

LP38858S-1.2 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SS passive Soft-start capacitor connection that slows the rise time of VOUT at turn-on; typical CSS is 1 nF to 100 nF and no other components should be connected to this pin.
2 IN power_in Unregulated voltage input pin; VIN must be at least VOUT + VDO and no higher than VBIAS.
3 GND power_in Ground pin; the CSS capacitor must return to this device ground pin on a clean ground path.
4 OUT power_out Regulated output voltage pin; the output capacitor must be located less than 1 cm from this pin, and a minimum of 10 µF ceramic is required for stability.
5 BIAS power_in Supply for the internal control and reference circuitry and N-MOS gate drive; it must be within 3.0 V to 5.5 V and needs a bias capacitor of at least 1 µF.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature Range -65 150 °C 2
Lead Temperature Soldering 260 °C 5 seconds 2
ESD Rating Human Body Model -2 2 kV Human Body Model 2
VIN Supply Voltage (Survival) VIN -0.3 6 V 2
VBIAS Supply Voltage (Survival) VBIAS -0.3 6 V 2
VSS Soft-Start Voltage (Survival) VSS -0.3 6 V 2
VOUT Voltage (Survival) VOUT -0.3 6 V 2
Junction Temperature (absolute maximum) -40 150 °C 2
VBIAS Supply Voltage (operating) VBIAS 3 5.5 V 3
Output Current (operating) IOUT 0 1.5 A 3
Junction Temperature Range (operating) -40 125 °C 3
VOUT Accuracy (TJ = 25°C) VOUT -1 0 1 % VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A 3
VOUT Accuracy (0°C ≤ TJ ≤ +125°C) VOUT -2 0 2 % VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A, 0°C ≤ TJ ≤ +125°C 3
VOUT Accuracy (-40°C ≤ TJ ≤ +125°C) VOUT -3 3 % VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A 3
Dropout Voltage (TJ = 25°C) VDO 130 165 mV IOUT = 1.5A 3
Dropout Voltage (over TJ range) VDO 180 mV IOUT = 1.5A 3
Quiescent Current from VIN Supply, LP38858-1.2 (TJ = 25°C) IGND(IN) 11 12 mA 10 mA ≤ IOUT ≤ 1.5A 3
Quiescent Current from VIN Supply, LP38858-1.2 (over TJ range) IGND(IN) 15 mA 10 mA ≤ IOUT ≤ 1.5A 3
Quiescent Current from VBIAS Supply (TJ = 25°C) IGND(BIAS) 3 3.8 mA 10 mA ≤ IOUT ≤ 1.5A 3
Quiescent Current from VBIAS Supply (over TJ range) IGND(BIAS) 4.5 mA 10 mA ≤ IOUT ≤ 1.5A 3
UVLO Threshold (TJ = 25°C) UVLO 2.2 2.45 2.7 V VBIAS rising until device is functional 3
UVLO Threshold (over TJ range) UVLO 2 2.9 V VBIAS rising until device is functional 3
UVLO Hysteresis (TJ = 25°C) UVLO(HYS) 60 150 300 mV VBIAS falling from UVLO threshold until device is non-functional 3
UVLO Hysteresis (over TJ range) UVLO(HYS) 50 350 mV VBIAS falling from UVLO threshold until device is non-functional 3
Soft-Start internal resistance, LP38858-1.2 rSS 13.5 16 18.5 kΩ 3
Thermal Resistance Junction to Ambient, DDPAK/TO-263-5 θJ-A 60 °C/W DDPAK/TO-263-5 package 4
Thermal Resistance Junction to Case, DDPAK/TO-263-5 θJ-C 3 °C/W DDPAK/TO-263-5 package 4

CAD (KiCad official)

  • Symbol: LP38858S-1.2
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lp38858s-1-2-etched.step / lp38858s-1-2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp38858s-1-2.step / lp38858s-1-2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (22 pp, sha256 228c8d873bab51f9, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF