3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX35LF2GE4AD-Z4I
MXIC(Macronix) · NAND FLASH · WSON-8
MX35LF2GE4AD-Z4I from MXIC(Macronix), in a WSON-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select; per Device Operation, a CS# falling edge starts a command and the device stays in active mode until the next CS# rising edge. |
| 2 | SO/SIO1 | bidirectional | Serial data output in 1 x I/O mode and serial data input and output (SIO1) in 1-1-2, 1-1-4, 1-2-2 or 1-4-4 modes, with data shifting out on the SCLK falling edge. |
| 3 | WP#/SIO2 | bidirectional | Write protection pin to be connected to GND, or serial data input and output (SIO2) in 1-1-4 or 1-4-4 modes. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial data input in 1 x I/O mode and serial data input and output (SIO0) in 1-1-2, 1-1-4, 1-2-2 or 1-4-4 modes, with data latched on the SCLK rising edge. |
| 6 | SCLK | input | Serial clock input; input data is latched on its rising edge and output data shifts out on its falling edge. |
| 7 | HOLD#/SIO3 | bidirectional | Hold input, or serial data input and output (SIO3) in 1-1-4 or 1-4-4 modes. |
| 8 | VCC | power_in | Power supply; the ordering information lists the L voltage option as 2.7V to 3.6V (3V device). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | WSON-8 |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | 2.7 | 3.6 | V | Operating range -40°C to +85°C, +3.3V tolerance | 66 | |
| Operating temperature | -40 | 85 | °C | Industrial grade (I) operating range | 66 | ||
| VCC supply voltage with respect to ground | VCC | -0.6 | 4.6 | V | With respect to ground (Note 2) | 65 | |
| All input voltages with respect to ground | -0.6 | 4.6 | V | With respect to ground (Note 2) | 65 | ||
| Temperature under bias | -50 | 125 | °C | 65 | |||
| Storage temperature | -65 | 150 | °C | 65 | |||
| ESD protection | 2000 | V | Printed as >2000V | 65 | |||
| Voltage overshoot below Vss during transitions | -2 | V | Voltage transitions, up to 20ns (Note 3) | 65 | |||
| VCC voltage for proper power-up initialization | VPWD | 0.9 | V | VCC must be below VPWD for proper initialization | 64 | ||
| Voltage threshold for re-initialization on VCC drop | V_keep | 2.4 | V | Re-initialization needed if VCC drops below V_keep | 64 | ||
| Minimum duration to ensure power-on initialization | tPWD | 300 | us | Characterized only | 64 | ||
| Write inhibit voltage | VWI | 2 | 2.4 | V | 64 | ||
| Input leakage current | ILI | -10 | 10 | uA | VIN = 0 to VCC MAX | 67 | |
| Output leakage current | ILO | -10 | 10 | uA | VOUT = 0 to VCC MAX | 67 | |
| VCC standby current (CMOS) | ISB1 | 110 | uA | VIN=VCC or GND, CS#=VCC | 67 | ||
| VCC active current | ICC1 | 20 | 40 | mA | f=133MHz, Iout = 0mA | 67 | |
| VCC active current | ICC1 | 16 | 30 | mA | f=80MHz, Iout = 0mA | 67 | |
| VCC active current (Read for continuous read operation) | ICC2 | 30 | 50 | mA | f=104MHz, Iout = 0mA | 67 | |
| VCC active current (Read for continuous read operation) | ICC2 | 28 | 40 | mA | f=80MHz, Iout = 0mA | 67 | |
| VCC active current (Program) | ICC3 | 30 | 40 | mA | 67 | ||
| VCC active current (Erase) | ICC4 | 25 | 30 | mA | 67 | ||
| Input low level | VIL | -0.3 | V | Printed maximum is 0.2VCC (not a fixed number) | 67 | ||
| Output low voltage | VOL | 0.2 | V | IOL = 1mA | 67 | ||
| Data transfer time from array to data register (2Gb) | tRD | 70 | us | 2Gb | 68 | ||
| Data transfer time from array to data register for OTP page (2Gb) | tRD_OTP | 75 | us | 2Gb | 68 | ||
| Dummy busy time for cache read (2Gb) | tRCBSY | 50 | 70 | us | 2Gb | 68 | |
| Page programming time (2Gb) | tPROG | 360 | 760 | us | 2Gb | 68 | |
| Block erase time (2Gb) | tERS | 4 | 6 | ms | 2Gb | 68 | |
| Serial clock frequency for all commands | fC | 133 | MHz | Non-continuous read, 8WSON only (fC=133MHz column) | 67 | ||
| HOLD# hold time relative to SCLK | tCHHH | 3.375 | ns | fC=133MHz | 67 | ||
| HOLD hold time relative to SCLK | tCHHL | 3.375 | ns | fC=133MHz | 67 | ||
| CS# disselect time | tCS | 30 | ns | fC=133MHz | 67 | ||
| CS# active hold time relative to SCLK | tCHSH | 3.375 | ns | fC=133MHz | 67 | ||
| CS# active setup time relative to SCLK | tSLCH | 3.375 | ns | fC=133MHz | 67 | ||
| CS# not active setup time relative to SCLK | tSHCH | 3.375 | ns | fC=133MHz | 67 | ||
| CS# not active hold time relative to SCLK | tCHSL | 3.375 | ns | fC=133MHz | 67 | ||
| Output disable time | tDIS | 20 | ns | fC=133MHz | 67 | ||
| HOLD setup time relative to SCLK | tHC | 3.375 | ns | fC=133MHz | 67 | ||
| HOLD# setup time relative to SCLK | tHD | 3.375 | ns | fC=133MHz | 67 | ||
| Data input hold time | tHDDAT | 2 | ns | fC=133MHz | 67 | ||
| Output hold time | tHO | 1 | ns | fC=133MHz | 67 | ||
| HOLD# to output high-Z | tHZ | 15 | ns | fC=133MHz | 67 | ||
| HOLD# to output low-Z | tLZ | 15 | ns | fC=133MHz | 67 | ||
| Data in setup time | tSUDAT | 2 | ns | fC=133MHz | 67 | ||
| Serial clock low to output valid | tV | 8 | ns | 30pF load, fC=133MHz | 67 | ||
| Serial clock low to output valid | tV | 6 | ns | 10pF load, fC=133MHz | 67 | ||
| Write protect hold time | tWPH | 100 | ns | fC=133MHz | 67 | ||
| Write protect setup time | tWPS | 20 | ns | fC=133MHz | 67 | ||
| Clock rise time (peak to peak) | tCRT | 1.3 | V/ns | Peak to peak; printed as 1.3 in the min column per review note | 67 | ||
| Clock fall time (peak to peak) | tCFT | 1.3 | V/ns | Peak to peak; printed as 1.3 in the min column per review note | 67 | ||
| VCC(min.) to device operation | tVSL | 5 | ms | 67 | |||
| Input capacitance | CIN | 6 | pF | TA=+25°C, F=1MHz, VIN=0V | 66 | ||
| Output capacitance | COUT | 8 | pF | TA=+25°C, F=1MHz, VOUT=0V | 66 |
CAD (KiCad official)
- Symbol:
MX35LF2GE4AD-Z4I - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: WSON-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mx35lf2ge4ad-z4i-etched.step/mx35lf2ge4ad-z4i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx35lf2ge4ad-z4i.step/mx35lf2ge4ad-z4i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (75 pp, sha256
2fb869a39fff4b11, retrieved 2026-11-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).