Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM358AN

Texas Instruments · Operational Amplifier · PDIP-8

LM358AN from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output, channel A
2 -INA input Inverting input, channel A
3 +INA input Non-inverting input, channel A
4 GND / V- power_in Ground for single-supply configurations. Negative supply for dual-supply configurations.
5 +INB input Non-inverting input, channel B
6 -INB input Inverting input, channel B
7 OUTB output Output, channel B
8 V+ power_in Positive supply

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VIO 2 3 mV See(3), TA = 25°C 5
Input Bias Current IIN 45 100 nA IIN(+) or IIN(−), TA = 25°C, VCM = 0 V 5
Input Offset Current IIO 5 30 nA IIN(+) − IIN(−), VCM = 0 V, TA = 25°C 5
Input Common-Mode Voltage Range VCM 0 V V+ = 30 V, TA = 25°C (LM2904, V+ = 26 V); max printed as V+ − 1.5 V 5
Supply Current IS 1 2 mA RL = ∞ on All Op Amps, V+ = 30 V (LM2904 V+ = 26 V) 5
Supply Current IS 0.5 1.2 mA RL = ∞ on All Op Amps, V+ = 5 V 5
Large Signal Voltage Gain AVS 25 100 V/mV V+ = 15 V, TA = 25°C, RL ≥ 2 kΩ, VO = 1 V to 11 V 5
Common-Mode Rejection Ratio CMRR 65 85 dB TA = 25°C, VCM = 0 V to V+ − 1.5 V 5
Power Supply Rejection Ratio PSRR 65 100 dB V+ = 5 V to 30 V (LM2904, V+ = 5 V to 26 V), TA = 25°C 5
Amplifier-to-Amplifier Coupling -120 dB f = 1 kHz to 20 kHz, TA = 25°C (Input Referred), See(6) 5
Output Current Source IO+ 20 40 mA VIN+ = 1 V, VIN− = 0 V, V+ = 15 V, VO = 2 V, TA = 25°C 5
Output Current Sink IO− 10 20 mA VIN− = 1 V, VIN+ = 0 V, V+ = 15 V, TA = 25°C, VO = 2 V 5
Output Current Sink (VO = 200 mV) IO− 12 50 μA VIN− = 1 V, VIN+ = 0 V, TA = 25°C, VO = 200 mV, V+ = 15 V 5
Short Circuit to Ground ISC 40 60 mA TA = 25°C, See(1), V+ = 15 V 6
Input Offset Voltage (full temperature range) VIO 5 mV See(3) 6
Input Offset Voltage Drift 7 20 μV/°C RS = 0 Ω 6
Input Offset Current (full temperature range) IIO 75 nA 6
Input Offset Current Drift 10 300 pA/°C RS = 0 Ω 6
Input Bias Current (full temperature range) IIN 40 200 nA 6
Input Common-Mode Voltage Range (full temperature range) VCM 0 V V+ = 30 V, See(5) (LM2904, V+ = 26 V); max printed as V+ − 2 V 6
Large Signal Voltage Gain AVS 15 V/mV V+ = +15 V, VO = 1 V to 11 V, RL ≥ 2 kΩ 6
Output Voltage Swing VOH VOH 26 V V+ = +30 V, RL = 2 kΩ 6
Output Voltage Swing VOH VOH 27 28 V RL = 10 kΩ 6
Output Voltage Swing VOL VOL 5 20 mV V+ = 5 V, RL = 10 kΩ 6
Output Current Source (full range row) IO+ 10 20 mA VIN+ = +1 V, VIN− = 0 V, V+ = 15 V, VO = 2 V 6
Output Current Sink (full range row) IO− 5 8 mA VIN− = +1 V, VIN+ = 0 V, V+ = 15 V, VO = 2 V 6
Supply Voltage (V+ − V−) VS 3 32 V Dual-supply values printed as (±1.5) min and (±16) max 5
Operating Temperature TA 0 70 °C LM358 5
Supply Voltage (V+) V+ 32 V 4
Differential Input Voltage VID 32 V 4
Input Voltage VIN -0.3 32 V 4
Power Dissipation PDIP (P) PD 830 mW PDIP (P) package 4
Input Current IIN 50 mA VIN < −0.3 V 4
Temperature -55 125 °C 4
Lead Temperature PDIP (P) soldering 260 °C Soldering, 10 seconds 4
Storage Temperature Tstg -65 150 °C 4
Junction-to-Ambient Thermal Resistance (PDIP, P) RθJA 120 °C/W PDIP (P) package 5

CAD (KiCad official)

  • Symbol: LM358AN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lm358an-etched.step / lm358an-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm358an.step / lm358an.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 084f9f8cf964b811, retrieved 2026-10-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF