Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADTC114ECAQ-13

Diodes Incorporated · Digital Transistors · SOT-23

ADTC114ECAQ-13 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN input Input (base) through built-in 10kΩ R1 (nominal), with input voltage rated -10 to +40 V relative to pin 2, Vi(OFF) min 0.5 V and Vi(ON) max 3 V.
2 GND (0) power_in Ground (emitter) reference pin, to which supply voltage (pin 3) and input voltage (pin 1) are referenced.
3 OUT output Output (collector) of the NPN pre-biased transistor, with supply voltage rated 50 V to pin 2 and output current of 50 mA (IC max 100 mA).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-23
Category Transistors/Thyristors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 50 V Pin (3) to (2), TA = +25°C 2
Input Voltage VIN -10 40 V Pin (1) to (2), TA = +25°C 2
Output Current IO 50 mA TA = +25°C 2
Output Current IC (Max) 100 mA TA = +25°C 2
Power Dissipation PD 310 mW Note 6, mounted on FR4 PC board with minimum recommended pad layout, TA = +25°C 2
Thermal Resistance, Junction to Ambient Air RθJA 403 °C/W Note 6, mounted on FR4 PC board with minimum recommended pad layout, TA = +25°C 2
Operating and Storage Temperature Range TJ, TSTG -55 150 °C TA = +25°C 2
Input Resistor Tolerance R1 -30 30 % 4
Resistance Ratio Tolerance R2/R1 -20 20 % 4
Input Voltage (OFF) Vl(OFF) 1.1 0.5 V VCC = 5V, IO = 100μA 4
Input Voltage (ON) Vl(ON) 1.9 3 V VO = 0.3V, IO = 10mA 4
Output Voltage VO(on) 0.1 0.3 V IO/Il = 10mA/0.5mA 4
Input Current Il 0.88 mA VI = 5V 4
Output Current IO(off) 0.5 μA VCC = 50V, VI = 0V 4
DC Current Gain Gl 30 VO = 5V, IO = 5mA 4
Gain-Bandwidth Product fT 250 MHz VCE = 10V, IE = 5mA, f = 100MHz 4
Input Resistor R1, R2 nominal R1, R2 (NOM) 10 kΩ 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin  Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADTC114ECAQ-13
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.025 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adtc114ecaq-13-etched.step / adtc114ecaq-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adtc114ecaq-13.step / adtc114ecaq-13.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (7 pp, sha256 3ab094eddea4e52c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF