3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPT2502
PTC(Princeton Tech) · Motor Driver ICs · SSOP-28-150mil
PT2502 from PTC(Princeton Tech), in a SSOP-28-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | I2C serial clock used to set and program OTP parameters. |
| 2 | SDA | bidirectional | I2C serial data used to set and program OTP parameters. |
| 3 | VPP | power_in | OTP programming voltage, 7.5V when programming and 5V in normal operation. |
| 4 | WL | output | W-phase low-side gate drive output to the external gate driver. |
| 5 | VL | output | V-phase low-side gate drive output to the external gate driver. |
| 6 | UL | output | U-phase low-side gate drive output to the external gate driver. |
| 7 | WH | output | W-phase high-side gate drive output to the external gate driver. |
| 8 | VH | output | V-phase high-side gate drive output to the external gate driver. |
| 9 | UH | output | U-phase high-side gate drive output to the external gate driver. |
| 10 | CLK | unconnected | CLK pin, left unconnected in the application circuit. |
| 11 | GND | power_in | Ground. |
| 12 | VDD | power_in | Supply input, 6V to 24V in the application circuit, decoupled with a capacitor. |
| 13 | VREG | power_out | Internal +5V LDO output supplying logic and analog circuits; also the VREG calibration point for the UI Kit VCON. |
| 14 | FWR | input | Forward/reverse direction command input; a reverse command decelerates the motor to coast and restarts in the opposite direction. |
| 15 | RSEN | input | Current sense pin shown in the application circuit. |
| 16 | RF | input | Current-sense voltage input for over-current detection and current limiting, which reduces PWM duty above the set threshold. |
| 17 | NC | unconnected | No connect. |
| 18 | OVP | input | Over-voltage protection input, enabled by the enOVP parameter, which puts the system in Lock-On State on over-voltage. |
| 19 | ZCU | input | U-phase back-EMF zero-crossing sense input. |
| 20 | ZCV | input | V-phase back-EMF zero-crossing sense input. |
| 21 | ZCW | input | W-phase back-EMF zero-crossing sense input. |
| 22 | ZCO | input | Back-EMF zero-crossing sense common (motor neutral) input. |
| 23 | COMI | passive | Compensation pin with an external capacitor in the application circuit. |
| 24 | FLT | passive | Filter pin connected to COMI through an external capacitor in the application circuit. |
| 25 | OSC_C | passive | Oscillator capacitor pin with an external capacitor to ground. |
| 26 | VSP | input | Speed command input by PWM duty or DC voltage (PWMIN), also usable for frequency speed control. |
| 27 | RD | output | RD output shown in the application circuit. |
| 28 | FG | output | Speed (FG) frequency output; also the 160kHz trim clock output used by the UI Kit FCON. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PTC(Princeton Tech) |
| Package | SSOP-28-150mil |
| Category | Power Management ICs |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
PT2502 - Footprint:
Package_SO:SSOP-28_3.9x9.9mm_P0.635mm - 3D model: SSOP-28-150mil (KiCad packages3D, STEP)
- 3D model files:
pt2502-etched.step/pt2502-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt2502.step/pt2502.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PTC(Princeton Tech) datasheet, copy hosted by LCSC (21 pp, sha256
9c40daf3cff69469, retrieved 2026-11-21) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).