3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSY58012UMG
Microchip Tech · Clock Buffers, Drivers · QFN-16-EP(3x3)
SY58012UMG from Microchip Tech, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Differential input pair signal to be buffered, internally terminated with 50Ω to VT; the input defaults to an indeterminate state if left open. |
| 2 | VT | passive | Input termination center-tap that each input (IN, /IN) terminates to, providing a termination network connection for interface flexibility. |
| 3 | VREF_AC | output | Reference output biased to VCC - 1.2V for AC-coupled inputs, connected directly to VT, bypassed with 0.01 μF, and limited to a maximum source or sink current of 0.5 mA. |
| 4 | /IN | input | Complementary differential input signal to be buffered, internally terminated with 50Ω to VT; the input defaults to an indeterminate state if left open. |
| 5 | VCC | power_in | Positive power supply, bypassed with 0.1 μF//0.01 μF low ESR capacitors with the 0.01 μF capacitor as close to the pin as possible; supply range is 2.375 V to 3.63 V. |
| 6 | GND | power_in | Ground pin that must be at the same potential as the exposed pad ground plane. |
| 7 | GND | power_in | Ground pin that must be at the same potential as the exposed pad ground plane. |
| 8 | VCC | power_in | Positive power supply, bypassed with 0.1 μF//0.01 μF low ESR capacitors with the 0.01 μF capacitor as close to the pin as possible; supply range is 2.375 V to 3.63 V. |
| 9 | Q1 | output | LVPECL differential output copy of the input signal, typically 800 mV swing; unused output pairs may be left floating with no impact on jitter. |
| 10 | /Q1 | output | Complementary LVPECL differential output copy of the input signal, typically 800 mV swing; unused output pairs may be left floating with no impact on jitter. |
| 11 | /Q0 | output | Complementary LVPECL differential output copy of the input signal, typically 800 mV swing; unused output pairs may be left floating with no impact on jitter. |
| 12 | Q0 | output | LVPECL differential output copy of the input signal, typically 800 mV swing; unused output pairs may be left floating with no impact on jitter. |
| 13 | VCC | power_in | Positive power supply, bypassed with 0.1 μF//0.01 μF low ESR capacitors with the 0.01 μF capacitor as close to the pin as possible; supply range is 2.375 V to 3.63 V. |
| 14 | GND | power_in | Ground pin that must be at the same potential as the exposed pad ground plane. |
| 15 | GND | power_in | Ground pin that must be at the same potential as the exposed pad ground plane. |
| 16 | VCC | power_in | Positive power supply, bypassed with 0.1 μF//0.01 μF low ESR capacitors with the 0.01 μF capacitor as close to the pin as possible; supply range is 2.375 V to 3.63 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-16-EP(3x3) |
| Category | RTC/Clock Chip |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
SY58012UMG - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
sy58012umg-etched.step/sy58012umg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sy58012umg.step/sy58012umg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
8010ff3d73fc62ff, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).