component
CAT811TTBI-GT3
Public Made by Adomby adom
onsemi Supervisor And Reset ICs, SOT-143. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownCAT811TTBI-GT3
onsemi · Supervisor And Reset ICs · SOT-143
CAT811TTBI-GT3 from onsemi, in a SOT-143. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | RESET | output | Active LOW push-pull reset output that is asserted if VCC falls below the reset threshold and remains low for at least 140 ms after VCC rises above the reset threshold. |
| 3 | MR | input | Manual reset input where a logic LOW asserts RESET, which stays active while MR is LOW and for 140 ms after MR returns HIGH; it has an internal 20 kΩ pull-up resistor and should be left open if not used. |
| 4 | VCC | power_in | Power supply voltage that is monitored by the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-143 |
| Category | Power Management (PMIC) |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Range | 1 | 5.5 | V | TA = 0°C to +70°C | 3 | ||
| VCC Range | 1.2 | 5.5 | V | TA = −40°C to +85°C | 3 | ||
| Supply Current | ICC | 6 | 15 | µA | TA = −40°C to +85°C, VCC < 3.6 V, S/T | 3 | |
| Reset Threshold Voltage (T threshold) | VTH | 3.04 | 3.08 | 3.11 | V | TA = +25°C | 3 |
| Reset Threshold Voltage (T threshold) | VTH | 3 | 3.15 | V | TA = −40°C to +85°C | 3 | |
| RESET Output Voltage Low | VOL | 0.3 | V | VCC = VTH min, ISINK = 1.2 mA, CAT811S/T | 4 | ||
| Reset Active Timeout Period | 140 | 240 | 400 | ms | TA = −40°C to +85°C | 3 | |
| MR Pull-up Resistance | 10 | 20 | 75 | kΩ | 4 | ||
| Absolute maximum voltage, any pin with respect to ground | -0.3 | 6 | V | 3 | |||
| Input Current, VCC | 20 | mA | 3 | ||||
| Output Current, RESET | 20 | mA | 3 | ||||
| Rate of Rise, VCC | 100 | V/µs | 3 | ||||
| Continuous Power Dissipation | 320 | mW | Derate 4 mW/°C above +70°C (SOT−143) | 3 | |||
| Storage Temperature Range | -65 | 105 | °C | 3 | |||
| Operating Ambient Temperature Range | -40 | 85 | °C | 3 | |||
| Lead Soldering Temperature | 300 | °C | 10 seconds | 3 | |||
| Reset Threshold Tempco | 30 | ppm/°C | 3 | ||||
| VCC to Reset Delay | 20 | µs | VCC = VTH to (VTH − 100 mV) | 3 | |||
| MR Minimum Pulse Width | tMR | 10 | µs | 4 | |||
| MR Glitch Immunity | 100 | ns | 4 | ||||
| MR to RESET Propagation Delay | tMD | 0.5 | µs | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Available in SOT−143 Packages with Sn or NiPdAu Green Lead | 1 |
CAD (KiCad official)
- Symbol:
CAT811TTBI-GT3 - Footprint:
Package_TO_SOT_SMD:SOT-143 - 3D model: SOT-143 (KiCad packages3D, STEP)
- 3D model files:
cat811ttbi-gt3-etched.step/cat811ttbi-gt3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cat811ttbi-gt3.step/cat811ttbi-gt3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (9 pp, sha256
c2ce824f1ffb1efa, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).