Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6205IS5#TRMPBF

Analog Devices · Video Amplifiers · TSOT-23-5

LT6205IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which swings within 60mV of either supply rail.
2 V- power_in Negative supply pin; total supply (V+ to V-) is specified from 2.7V to 12.6V, and the negative supply pin should be bypassed with a small capacitor (typically 0.01μF to 0.1μF) when split supplies are used.
3 +IN input Non-inverting input whose common-mode range includes ground; it can be driven beyond the supplies without damage or phase reversal, with input current limited to ±10mA absolute maximum.
4 -IN input Inverting input protected by back-to-back diodes that limit the differential input voltage to ±1.4V, with input current to be limited to less than 10mA if the differential voltage exceeds 1.4V.
5 V+ power_in Positive supply pin; total supply voltage (V+ to V-) must not exceed 12.6V, and it should be bypassed with a small capacitor (typically 0.01μF to 0.1μF) within 0.25 inches of the pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 1 5 mV VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V (I-grade) 3
Input Offset Voltage Match (Channel-to-Channel) 1 4 mV Note 5 3
Input Offset Voltage Drift 7 15 μV/°C Note 6; VS = 3V, 0V; VS = 5V, 0V 3
Input Bias Current IB 10 30 μA VS = 3V, 0V; VS = 5V, 0V 3
Input Offset Current IOS 0.6 3 μA VS = 3V, 0V; VS = 5V, 0V 3
Common Mode Rejection Ratio CMRR 78 90 dB VCM = 0V to V+, 2V 3
Input Voltage Range (low limit) 0 V Upper limit printed as V+, 2 V (not numeric) 3
Power Supply Rejection Ratio PSRR 67 75 dB VS = 3V to 12V, VCM = VOUT = 0.5V 3
Minimum Supply Voltage 2.7 V VCM = 0.5V 3
Large-Signal Voltage Gain AVOL 30 100 V/mV VS = 5V, VO = 0.5V to 4.5V, RL = 1k 3
Large-Signal Voltage Gain AVOL 5 20 V/mV VS = 5V, VO = 1V to 3V, RL = 150Ω 3
Large-Signal Voltage Gain AVOL 20 60 V/mV VS = 3V, VO = 0.5V to 2.5V, RL = 1k 3
Output Voltage Swing Low VOL 10 25 mV No Load, Input Overdrive = 30mV 3
Output Voltage Swing Low VOL 75 150 mV ISINK = 5mA 3
Output Voltage Swing Low VOL 300 500 mV VS = 5V, ISINK = 25mA 3
Output Voltage Swing Low VOL 200 350 mV VS = 3V, ISINK = 15mA 3
Output Voltage Swing High VOH 60 100 mV No Load, Input Overdrive = 30mV 3
Output Voltage Swing High VOH 150 250 mV ISOURCE = 5mA 3
Output Voltage Swing High VOH 650 1200 mV VS = 5V, ISOURCE = 25mA 3
Output Voltage Swing High VOH 300 500 mV VS = 3V, ISOURCE = 15mA 3
Short-Circuit Current ISC 20 60 mA VS = 5V, Output Shorted to GND 3
Short-Circuit Current ISC 20 50 mA VS = 3V, Output Shorted to GND 3
Supply Current per Amplifier IS 3.75 5.75 mA VS = 3V, 0V; VS = 5V, 0V 3
Gain Bandwidth Product GBW 65 100 MHz f = 2MHz 3
Input Offset Voltage VOS 1 6 mV VS = ±5V (I-grade) 4
Input Offset Voltage Match (Channel-to-Channel) 1 4 mV Note 5; VS = ±5V 4
Input Offset Voltage Drift 10 18 μV/°C Note 6; VS = ±5V 4
Input Bias Current IB 18 30 μA VS = ±5V 4
Input Offset Current IOS 0.6 3 μA VS = ±5V 4
Common Mode Rejection Ratio CMRR 78 90 dB VCM = -5V to 3V 4
Input Voltage Range -5 3 V VS = ±5V 4
Power Supply Rejection Ratio PSRR 67 75 dB VS = ±2V to ±6V 4
Large-Signal Voltage Gain AVOL 50 133 V/mV VO = -4V to 4V, RL = 1k 4
Large-Signal Voltage Gain AVOL 7.5 20 V/mV VO = -3V to 3V, RL = 150Ω 4
Output Voltage Swing (magnitude) 4.88 4.92 V No Load, Input Overdrive = 30mV 4
Output Voltage Swing (magnitude) 4.75 4.85 V IOUT = ±5mA 4
Output Voltage Swing (magnitude) 3.8 4.35 V IOUT = ±25mA 4
Short-Circuit Current ISC 30 60 mA Short to Ground, VS = ±5V 4
Supply Current per Amplifier IS 4 6.5 mA VS = ±5V 4
Gain Bandwidth Product GBW 65 100 MHz f = 2MHz, VS = ±5V 4
Slew Rate SR 350 600 V/μs AV = -1, RL = 1k, VO = -4V to 4V, measured from -3V to 3V 4
Full Power Bandwidth FPBW 14 24 MHz VOUT = 8VP-P 4
Input Current -10 10 mA 2
Pin Current While Exceeding Supplies -25 25 mA Note 9 2
Operating Temperature Range (LT6205I) -40 85 °C LT6205I 2
Specified Temperature Range (LT6205I) -40 85 °C LT6205I 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C 10 sec 2
Thermal Resistance Junction-to-Ambient θJA 250 °C/W 5-lead TSOT-23 (S5) package 2

CAD (KiCad official)

  • Symbol: LT6205IS5#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lt6205is5-trmpbf-etched.step / lt6205is5-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6205is5-trmpbf.step / lt6205is5-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 dcdb68d1efcc0b7a, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF