component
MP5036GJ-Z
Public Made by Adomby adom
Monolithic Power Systems Power Distribution Switches, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP5036GJ-Z
Monolithic Power Systems · Power Distribution Switches · TSOT-23-6
MP5036GJ-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin: force EN high to enable the MP5036, and float EN or pull it to ground to disable the IC; for quick start-up, pull EN up to VIN through a 300kΩ resistor. |
| 2 | SOURCE | power_out | Source of the internal power MOSFET and output terminal of the IC (absolute maximum VIN, SOURCE is -0.3V to +26V per page 3). |
| 3 | GND | power_in | System ground. |
| 4 | ILIMIT | passive | Current limit set: a resistor between ILIMIT and ground sets the current limit (for example, 402Ω gives about 3.5A), and floating ILIMIT selects a fixed 2.5A current limit. |
| 5 | VIN | power_in | Supply voltage: the MP5036 operates from a 2.9V to 14V input rail, requires a ceramic decoupling capacitor, and should be connected using a wide PCB trace. |
| 6 | DV/DT | passive | Slew-rate control: connect a capacitor from DV/DT to ground to set the output dv/dt slew rate (DV/DT floating gives 2V/ms per page 12). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage, VIN and SOURCE pins | -0.3 | 26 | V | 3 | |||
| Input voltage, all other pins | -0.3 | 5.5 | V | 3 | |||
| Junction temperature | -40 | 150 | °C | 3 | |||
| Continued operating VIN | 2.9 | 14 | V | 3 | |||
| Operating junction temperature (TJ) | TJ | -40 | 125 | °C | 3 | ||
| Under-voltage lockout rising threshold | VUVLO | 2.55 | 2.7 | 2.85 | V | 4 | |
| DV/DT slew rate | dv/dt | 1.3 | 2 | 2.7 | V/ms | DV/DT float | 4 |
| DV/DT current | IDV/DT | 4.5 | 6.5 | 8.5 | μA | VDV/DT = 0.5V | 4 |
| Current limit at normal operation | ILimit_NO | 2.3 | 2.5 | 2.7 | A | Float ILIMIT pin, TJ = 25°C | 4 |
| Current limit at normal operation | ILimit_NO | 3.2 | 3.5 | 3.8 | A | RLIMIT = 402Ω, TJ = 25°C | 4 |
| Current limit at normal operation | ILimit_NO | 0.68 | 0.75 | 0.82 | A | RLIMIT = 1.91kΩ, TJ = 25°C | 4 |
| Enable rising threshold | VEN_RISING | 1.86 | 2 | 2.16 | V | 4 | |
| Output over-voltage clamp voltage | VCLAMP | 14 | 15 | 16 | V | TJ = 25°C | 4 |
| Off-state leakage current | IOFF | 0.1 | 1 | μA | EN = 0V | 4 | |
| Supply current (quiescent) | IQ | 72 | μA | EN = HIGH | 4 | ||
| Supply current (shutdown) | IS | 17 | μA | EN = GND | 4 | ||
| On resistance | RDS(ON) | 43 | mΩ | IOUT = 1A | 4 | ||
| Turn-on delay | tdelay | 500 | μs | 4 | |||
| UVLO hysteresis | VUVLOHYS | 200 | mV | 4 | |||
| Enable hysteresis | VEN_HYS | 350 | mV | 4 | |||
| Enable pull-down resistor | REN_DOWN | 2.2 | MΩ | 4 | |||
| Discharge resistance | RDIS | 540 | Ω | VIN = 5V | 4 | ||
| Thermal shutdown | TSD | 175 | °C | 4 | |||
| Thermal hysteresis | TSD_HYS | 50 | °C | 4 | |||
| Thermal resistance junction-to-case, TSOT23-6 | θJC | 23 | °C/W | EV5036-J-00A board (note 4) | 3 |
CAD (KiCad official)
- Symbol:
MP5036GJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mp5036gj-z-etched.step/mp5036gj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp5036gj-z.step/mp5036gj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (16 pp, sha256
b3db125ed12ef438, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).