Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

MCP6292IDGKT

Texas Instruments · Operational Amplifier · VSSOP-8

MCP6292IDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A op-amp. Rail-to-rail output stage; capable of driving loads to within millivolts of either supply rail. Short-circuit protected (one amplifier per package).
2 -IN A input Inverting input of channel A op-amp. Rail-to-rail input range; diode-clamped to the supply rails. Input bias current typically 1 pA.
3 +IN A input Non-inverting input of channel A op-amp. Rail-to-rail input range; diode-clamped to the supply rails. Input bias current typically 1 pA.
4 V- power_in Negative (lowest) supply rail, or ground for single-supply operation. Total supply voltage (V+) - (V-) must be 2.4 V to 5.5 V (absolute max 6 V).
5 +IN B input Non-inverting input of channel B op-amp. Rail-to-rail input range; diode-clamped to the supply rails. Input bias current typically 1 pA.
6 -IN B input Inverting input of channel B op-amp. Rail-to-rail input range; diode-clamped to the supply rails. Input bias current typically 1 pA.
7 OUT B output Output of channel B op-amp. Rail-to-rail output stage; capable of driving loads to within millivolts of either supply rail. Short-circuit protected (one amplifier per package).
8 V+ power_in Positive (highest) supply rail. Operating range 2.4 V to 5.5 V referenced to V-; absolute max supply voltage 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MCP6292IDGKT
  • MCP6292IDGKTIDR
  • MCP6292IDGKTIDDF
  • MCP6292IDGKTIDDFR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Recommended supply voltage VS 2.4 5.5 V 8
Specified temperature -40 125 °C 8
Supply voltage 6 V 8
Signal input current -10 10 mA Signal input pins; input pins diode-clamped 8
Junction temperature TJ 150 °C 8
Storage temperature Tstg -65 150 °C 8
Human-body model (HBM) ESD V(ESD) -4000 4000 V Per ANSI/ESDA/JEDEC JS-001 8
Charged-device model (CDM) ESD V(ESD) -1500 1500 V Per JEDEC JESD22-C101 8
Input offset voltage VOS -3 0.3 3 mV VS = 5 V 10
Input offset voltage over temperature VOS -5 5 mV VS = 5 V, TA = –40°C to 125°C 10
Offset voltage drift dVOS/dT -1.1 1.1 µV/°C VS = 5 V, TA = –40°C to 125°C 10
Power-supply rejection ratio PSRR -7 7 µV/V VS = 2.4 V – 5.5 V, VCM = (V–) 10
Common-mode rejection ratio CMRR 80 103 dB VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C 10
Common-mode rejection ratio CMRR 57 87 dB VS = 5.5 V, VCM = –0.1 V to 5.6 V, TA = –40°C to 125°C 10
Common-mode rejection ratio CMRR 88 dB VS = 2.4 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C 10
Common-mode rejection ratio CMRR 81 dB VS = 2.4 V, VCM = –0.1 V to 1.9 V, TA = –40°C to 125°C 10
Input bias current IB -1 1 pA 10
Input offset current IOS -0.05 0.05 pA 10
Open-loop voltage gain AOL 100 dB VS = 2.4 V, (V–) + 0.04 V < VO < (V+) – 0.04 V, RL = 10 kΩ 10
Open-loop voltage gain AOL 104 130 dB VS = 5.5 V, (V–) + 0.05 V < VO < (V+) – 0.05 V, RL = 10 kΩ 10
Open-loop voltage gain AOL 130 dB VS = 5.5 V, (V–) + 0.15 V < VO < (V+) – 0.15 V, RL = 2 kΩ 10
Voltage output swing from supply rails VO 15 mV VS = 5.5 V, RL = 10 kΩ 11
Voltage output swing from supply rails VO 50 mV VS = 5.5 V, RL = 2 kΩ 11
Short-circuit current ISC -50 50 mA VS = 5 V 11
Quiescent current per amplifier IQ 600 1300 µA VS = 5.5 V, IO = 0 mA 11
Junction-to-ambient thermal resistance (DGK) RθJA 201.2 °C/W DGK (VSSOP), 8 pins 9
Junction-to-case (top) thermal resistance (DGK) RθJC(top) 85.7 °C/W DGK (VSSOP), 8 pins 9
Junction-to-board thermal resistance (DGK) RθJB 122.9 °C/W DGK (VSSOP), 8 pins 9
Junction-to-top characterization parameter (DGK) ψJT 21.2 °C/W DGK (VSSOP), 8 pins 9
Junction-to-board characterization parameter (DGK) ψJB 121.4 °C/W DGK (VSSOP), 8 pins 9

CAD (KiCad official)

  • Symbol: MCP6292IDGKT
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp6292idgkt-etched.step / mcp6292idgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6292idgkt.step / mcp6292idgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 2efbe2cb9b77c762, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF