3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2682MMX
Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm
LM2682MMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1− | passive | Negative terminal of flying capacitor C1, which is one of the three external pumping capacitors required by the voltage doubling inverter. |
| 2 | C2+ | passive | Positive terminal of flying capacitor C2, which is one of the three external pumping capacitors required by the voltage doubling inverter. |
| 3 | C2− | passive | Negative terminal of flying capacitor C2, which is one of the three external pumping capacitors required by the voltage doubling inverter. |
| 4 | VOUT | power_out | Generates the negative output voltage of −2VIN, and the datasheet limits VOUT to −11.6 V absolute maximum. |
| 5 | GND | power_in | Device ground reference for the charge pump. |
| 6 | VIN | power_in | Positive power supply input, with a supply voltage range of 2.0 V to 5.5 V and an absolute maximum of +5.8 V. |
| 7 | C1+ | passive | Positive terminal of flying capacitor C1, which is one of the three external pumping capacitors required by the voltage doubling inverter. |
| 8 | NC | unconnected | No internal connection; the pin is left unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VIN | 2 | 5.5 | V | RL = 2 kΩ | 2 | |
| Supply Current | IIN | 150 | 300 | μA | Open Circuit, No Load | 2 | |
| Supply Current (second max line) | IIN | 400 | μA | Open Circuit, No Load | 2 | ||
| VOUT Source Resistance | ROUT | 90 | 150 | Ω | IL = 10 mA | 2 | |
| VOUT Source Resistance (second max line) | ROUT | 200 | Ω | IL = 10 mA | 2 | ||
| VOUT Source Resistance | ROUT | 110 | 250 | Ω | IL=5 mA, VIN=2 V | 2 | |
| Oscillator Frequency | fOSC | 12 | 30 | kHz | See(2) | 2 | |
| Switching Frequency | fSW | 6 | 15 | kHz | See(2) | 2 | |
| Power Efficiency | ηPOWER | 90 | 93 | % | RL = 2k(3) | 2 | |
| Absolute Maximum Input Voltage | VIN | 5.8 | V | 2 | |||
| Absolute Maximum Output Voltage | VOUT | -11.6 | V | 2 | |||
| VIN dV/dT | 1 | V/μsec | 2 | ||||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Lead Temperature Soldering | 300 | °C | 2 | ||||
| Power Dissipation VSSOP | 300 | mW | VSSOP package | 2 | |||
| Junction Temperature Max | TJMAX | 150 | °C | 2 | |||
| ESD Susceptibility Human Body Model | 2 | kV | Human Body Model | 2 | |||
| ESD Susceptibility Machine Model | 200 | V | Machine Model | 2 | |||
| Ambient Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Junction to Ambient Thermal Resistance | θJ-A | 220 | °C/W | VSSOP-8 package | 2 |
CAD (KiCad official)
- Symbol:
LM2682MMX - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lm2682mmx-etched.step/lm2682mmx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2682mmx.step/lm2682mmx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (15 pp, sha256
3fa085d87f2dee03, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).