component
TP2412-SR
Public Unreviewedby Ray
3PEAK Operational Amplifier, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Contents
README
markdownTP2412-SR
3PEAK · Operational Amplifier · SOP-8
TP2412-SR from 3PEAK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. Rail-to-rail output; voltage range extends to within mV of each supply rail. High output current up to 70 mA (1.0 V drop). |
| 2 | -INA | input | Inverting input of amplifier A. High-impedance CMOS input; typical input bias current 0.3 pA at 27 °C. Inputs are ESD-protected by diodes to each supply; limit overdrive current to <10 mA. |
| 3 | +INA | input | Non-inverting input of amplifier A. Rail-to-rail input common-mode range from V-−0.1 V to V+−0.1 V. High-impedance CMOS input. |
| 4 | -Vs | power_in | Negative power supply (V- / Vss). Normally tied to ground; may be tied to a negative rail as long as V+ − V- is between 2.2 V and 5.5 V. Bypass with 0.1 µF as close to the part as possible. |
| 5 | +INB | input | Non-inverting input of amplifier B. Rail-to-rail input common-mode range from V-−0.1 V to V+−0.1 V. High-impedance CMOS input. |
| 6 | -INB | input | Inverting input of amplifier B. High-impedance CMOS input; typical input bias current 0.3 pA at 27 °C. |
| 7 | OUTB | output | Amplifier B output. Rail-to-rail output; voltage range extends to within mV of each supply rail. High output current up to 70 mA (1.0 V drop). |
| 8 | +Vs | power_in | Positive power supply (V+ / Vcc). Typical range 2.2 V to 5.5 V; split supplies allowed provided V+ − V- stays within 2.2-5.5 V. Bypass with 0.1 µF close to the pin. Absolute max supply voltage V+ − V- = 7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TP2412-SRTP2412-SRVRTP2412-SR-VRTP2412-SRTSRTP2412-SR-TSRTP2412-SRTRTP2412-SR-TR
CAD (KiCad official)
- Symbol:
TP2412-SR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tp2412-sr.step |
122 KB | You want the bare part, or you mark your own boards. |
tp2412-sr-etched.step |
1.8 MB | You want the part with TP2412-SR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 453 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (17 pp, sha256
4bf08b0bc2f5e752, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).