component
DX7002
Public Made by Adomby adom
Dersem LED Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDX7002
Dersem · LED Drivers · SOP-8
DX7002 from Dersem, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LD | input | Analog/step dimming input: 0.2-1.2 V sets analog dimming, LD floating selects full brightness, LD pulled above VDD by 1 V selects half-current mode, and the absolute maximum rating is -0.3 to 7.0 V. |
| 2 | PWM | input | PWM dimming input that enables output when high (rising threshold 1.4 V, falling 0.8 V), responds to pulses down to 60 ns, defaults high when floating, and is rated -0.3 to 7.0 V. |
| 3 | VDD | power_in | Chip supply pin that starts up above 4.2 V, clamps at about 5.0-5.2 V, needs a bypass capacitor of at least 1.0 µF placed close to the pin, and is rated -0.3 to 7.0 V. |
| 4 | CS | input | Source of the internal power MOSFET and current-sense input, where the sense resistor sets the output current (Iout = 0.2 V / RCS) and the overcurrent threshold is 216-264 mV; rated -0.3 to 7.0 V. |
| 5 | D | passive | Drain of the internal 80 mΩ / 60 V power MOSFET; this is a heat-sink pin that must be thermally managed according to the datasheet. |
| 6 | D | passive | Drain of the internal 80 mΩ / 60 V power MOSFET; this is a heat-sink pin that must be thermally managed according to the datasheet. |
| 7 | GND | power_in | Chip ground for the controller and gate driver. |
| 8 | GND | power_in | Chip ground for the controller and gate driver. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Dersem |
| Package | SOP-8 |
| Category | LED Drivers |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
DX7002 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
dx7002-etched.step/dx7002-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dx7002.step/dx7002.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Dersem datasheet (13 pp, sha256
9fc965ee3b895b5e, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).