3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3232ESE+
Analog Devices Inc Maxim Integrated · RS232 ICs · SOIC-16
MAX3232ESE+ from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor; 0.1µF is required for 3.0V to 5.5V operation. |
| 2 | V+ | power_out | Doubling charge-pump output regulated to +5.5V regardless of VCC over the 3.0V to 5.5V range; V+ and V- can have a maximum magnitude of 7V with an absolute difference not exceeding 13V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor. |
| 6 | V- | power_out | Inverting charge-pump output regulated to -5.5V regardless of VCC over the 3.0V to 5.5V range. |
| 7 | T2OUT | output | RS-232 transmitter output that holds at least ±5.0V into 3kΩ loads, with a continuous short-circuit duration limit and a ±13.2V output voltage absolute maximum. |
| 8 | R2IN | input | RS-232 receiver input with an input voltage range of ±25V. |
| 9 | R2OUT | output | TTL/CMOS receiver output that must stay within -0.3V to (VCC + 0.3V). |
| 10 | T2IN | input | TTL/CMOS transmitter input with no pullup, so unused inputs must be tied to GND or VCC; absolute maximum is -0.3V to +6V. |
| 11 | T1IN | input | TTL/CMOS transmitter input with no pullup, so unused inputs must be tied to GND or VCC; absolute maximum is -0.3V to +6V. |
| 12 | R1OUT | output | TTL/CMOS receiver output that must stay within -0.3V to (VCC + 0.3V). |
| 13 | R1IN | input | RS-232 receiver input with an input voltage range of ±25V. |
| 14 | T1OUT | output | RS-232 transmitter output that holds at least ±5.0V into 3kΩ loads, with a continuous short-circuit duration limit and a ±13.2V output voltage absolute maximum. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage of +3.0V to +5.5V, to be bypassed close to the IC with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Resistance (receiver, R_IN) | RIN | 3 | 5 | 7 | kΩ | TA = +25°C | 3 |
| Input Voltage Range (R_IN) | -25 | 25 | V | 2 | |||
| Input Logic Threshold Low | 0.8 | V | T_IN, EN, SHDN, MBAUD (Note 3) | 2 | |||
| Input Logic Threshold High | 2 | V | VCC = 3.3V; T_IN, EN, SHDN, MBAUD (Note 3) | 2 | |||
| Input Logic Threshold High | 2.4 | V | VCC = 5.0V; T_IN, EN, SHDN, MBAUD (Note 3) | 2 | |||
| Output Voltage Low | VOL | 0.4 | V | IOUT = 1.6mA | 2 | ||
| Output Leakage Current (receiver) | -10 | 0.05 | 10 | µA | Receivers disabled | 2 | |
| Input Leakage Current | -1 | 0.01 | 1 | µA | 2 | ||
| VCC Power-Supply Current | ICC | 0.3 | 1 | mA | No load, VCC = 3.3V or 5.0V, TA = +25°C | 2 | |
| Transmitter Output Voltage Swing | VOUT | 5 | 5.4 | V | All transmitter outputs loaded with 3kΩ to ground | 3 | |
| Output Short-Circuit Current | IOS | -60 | 35 | 60 | mA | 3 | |
| Output Resistance (transmitter, power-off) | ROUT | 300 | 10 | MΩ | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | |
| Output Leakage Current (transmitter) | -25 | 25 | µA | VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled | 3 | ||
| Transition-Region Slew Rate | 6 | 30 | V/µs | CL = 150pF to 1000pF; VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching | 3 | ||
| Transition-Region Slew Rate | 4 | 30 | V/µs | CL = 150pF to 2500pF; VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching | 3 | ||
| Maximum Data Rate | 120 | 235 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching; Normal operation | 3 | ||
| VCC Supply Voltage (absolute maximum) | VCC | -0.3 | 6 | V | 2 | ||
| V+ (absolute maximum) | V+ | -0.3 | 7 | V | Note 1: /V+/ and /V-/ max 7V; /V+ - V-/ max 13V | 2 | |
| V- (absolute maximum) | V- | -7 | 0.3 | V | Note 1 | 2 | |
| V+ + V- (absolute maximum) | V+ + V- | 13 | V | Note 1 | 2 | ||
| T_IN Input Voltage (absolute maximum) | T_IN | -0.3 | 6 | V | 2 | ||
| R_IN Input Voltage (absolute maximum) | R_IN | -25 | 25 | V | 2 | ||
| T_OUT Output Voltage (absolute maximum) | T_OUT | -13.2 | 13.2 | V | 2 | ||
| R_OUT Output Voltage (absolute maximum; max is VCC + 0.3V) | R_OUT | -0.3 | V | Upper limit printed as VCC + 0.3V | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 2 | |||
| Supply Voltage (recommended) | VCC | 3 | 5.5 | V | Electrical characteristics test range, C1-C4 = 0.1µF | 2 | |
| Operating Temperature Range (MAX32_ E _) | TA | -40 | 85 | °C | Extended (E) grade; MAX3232ESE+ is the E grade | 2 |
CAD (KiCad official)
- Symbol:
MAX3232ESE+ - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
max3232ese-etched.step/max3232ese-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232ese.step/max3232ese.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256
c1651b3e684c15c6, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).