component
TM5102
Public Made by Adomby adom
TM(Shenzhen Titan Micro Elec) AC-DC Controllers & Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTM5102
TM(Shenzhen Titan Micro Elec) · AC-DC Controllers & Regulators · SOP-8
TM5102 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; IC starts at VDD-ON 15.5V typ, shuts off below 8.5V (UVLO), OVP above 23V, recommended 10~23V, absolute max 30V. |
| 2 | NC | unconnected | No connect (empty pin). |
| 3 | FB | input | Voltage feedback pin connected to an optocoupler; input range 0 |
| 4 | SENSE | input | Current sense pin (MOSFET source) with an external resistor sensing MOSFET current; input -0.3~6.0V absolute max, 350ns leading edge blanking. |
| 5 | GATE | output | Gate drive output for the external MOSFET, clamped at 17V typical. |
| 6 | NC | unconnected | No connect (empty pin). |
| 7 | NC | unconnected | No connect (empty pin). |
| 8 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute max) | VDD | 30 | V | 3 | |||
| FB pin input voltage (absolute max) | VFB | -0.3 | 6 | V | 3 | ||
| CS pin input voltage (absolute max) | VCS | -0.3 | 6 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | ℃ | 3 | ||
| Storage temperature | TSTG | -40 | 150 | ℃ | 3 | ||
| Operating ambient temperature (absolute) | TA | -40 | 85 | ℃ | 3 | ||
| Soldering temperature | TL | 260 | ℃ | 10 秒 | 3 | ||
| Supply voltage (recommended) | VDD | 10 | 23 | V | 3 | ||
| FB pin input voltage (recommended) | VFB | 0 | 5.5 | V | 3 | ||
| Operating ambient temperature (recommended) | TA | -20 | 80 | ℃ | 3 | ||
| Thermal resistance junction to case | θJC | 82.5 | ℃/W | 3 | |||
| Startup voltage | VDD-ON | 14.5 | 15.5 | 16.5 | V | VDD=15.5V, TA=25℃ | 4 |
| Shutdown voltage | VDD-OFF | 8.5 | 9.5 | 10.5 | V | VDD=15.5V, TA=25℃ | 4 |
| Startup current | IDD-ST | 5 | 20 | uA | VDD=VDD-ON-0.5V | 4 | |
| Operating current | IDD-OP | 2.5 | 4 | mA | 4 | ||
| VDD overvoltage protection | VDD-OVP | 23 | 24 | V | 4 | ||
| VDD clamp voltage | VDD-CLAMP | 25 | 27 | V | IDD=5mA | 4 | |
| FB open-circuit voltage | VFB-OPEN | 4.4 | 4.7 | 5 | V | 4 | |
| Current limit (peak) | VCSTH-H | 1 | 1.1 | V | 4 | ||
| Current limit (valley) | VCSTH-L | 0.7 | 0.8 | V | 4 | ||
| Oscillator frequency | fOSC | 140 | 150 | 160 | KHz | 5 | |
| Frequency deviation vs VDD | fDV | 0.2 | 1 | % | VDD=10V to 23V | 5 | |
| Maximum duty cycle | DMAX | 75 | 80 | 85 | % | 5 | |
| Output low voltage | VOL | 1.5 | V | VDD =15V, IO =20mA | 5 | ||
| Output high voltage | VOH | 10 | V | VDD =15V, IO =20mA | 5 | ||
| Gate rise time | TR | 240 | US | VDD =15V, CL=1nF | 5 | ||
| Gate fall time | TF | 75 | US | VDD =15V, CL=1nF | 5 | ||
| Output clamp voltage | VG-CLAMP | 17 | V | 5 | |||
| Over-temperature protection | TOTP | 130 | ℃ | 5 | |||
| OTP hysteresis temperature | TOTP_SH | 105 | ℃ | 5 | |||
| PWM comparator gain | AV | 1.7 | V/V | 4 | |||
| FB input impedance | ZFB | 6 | KΩ | 4 | |||
| FB overload threshold | VFB-PL | 3.7 | V | 4 | |||
| Overload delay time | TPD | 50 | ms | 4 | |||
| Soft-start time | T_SS | 3 | ms | 4 | |||
| CS input impedance | ZCS | 5 | KΩ | 4 | |||
| Leading edge blanking time | TLEB | 350 | ns | 4 | |||
| Propagation delay time | TPD | 60 | ns | 4 | |||
| Frequency shuffling range | f△SHUFFLING | -6 | 6 | % | 5 | ||
| ESD HBM | 2 | KV | 人体模式, JESD22-A114 | 3 | |||
| ESD MM | 0.2 | KV | 机器模式, JESD22-A115 | 3 |
CAD (KiCad official)
- Symbol:
TM5102 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tm5102-etched.step/tm5102-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm5102.step/tm5102.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (10 pp, sha256
94203a890fe3e5c3, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).