3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHIP4086ABZT
Intersil(Renesas Electronics) · Gate Drive ICs · SOIC-24-300mil
HIP4086ABZT from Intersil(Renesas Electronics), in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BHB | power_in | Phase B high-side bias connection; connect the bootstrap diode cathode and the positive side of the bootstrap capacitor here. |
| 2 | BHI | input | Phase B high-side logic input, driven from 0V to 15V and no greater than VDD, with dead time set by RDEL overriding it when the low-side input is active. |
| 3 | BLI | input | Phase B low-side logic input, driven from 0V to 15V and no greater than VDD, controlling BLO and BHO when the high-side input is grounded. |
| 4 | ALI | input | Phase A low-side logic input, driven from 0V to 15V and no greater than VDD, controlling ALO and AHO when the high-side input is grounded. |
| 5 | AHI | input | Phase A high-side logic input, driven from 0V to 15V and no greater than VDD, with dead time set by RDEL overriding it when the low-side input is active. |
| 6 | VSS | power_in | Ground; connect the sources of the low-side power MOSFETs to this pin and use it as the reference for VDD decoupling. |
| 7 | RDEL | passive | Dead time set point; a resistor from this pin to VDD sets dead time from 0.5µs to 4.5µs, and tying it to VSS disables dead time. |
| 8 | UVLO | passive | Undervoltage set point; a resistor to VSS programs the threshold, with the disable typically 6.6V when left open and 6.2V when tied to VDD. |
| 9 | RFSH | passive | Refresh pulse setting; an optional capacitor to VSS lengthens the start-up bootstrap refresh pulse, which is typically 1.5µs when left unconnected. |
| 10 | DIS | input | Disable input; a high level (0V to 15V, no greater than VDD) sets all six outputs low and overrides all other inputs. |
| 11 | CLI | input | Phase C low-side logic input, driven from 0V to 15V and no greater than VDD, controlling CLO and CHO when the high-side input is grounded. |
| 12 | CHI | input | Phase C high-side logic input, driven from 0V to 15V and no greater than VDD, with dead time set by RDEL overriding it when the low-side input is active. |
| 13 | CHB | power_in | Phase C high-side bias connection; connect the bootstrap diode cathode and the positive side of the bootstrap capacitor here. |
| 14 | CHO | output | Phase C high-side gate drive output, to be connected to the gate of the phase C high-side power MOSFET. |
| 15 | CHS | passive | Phase C high-side source connection; connect to the high-side MOSFET source and the negative side of the bootstrap capacitor. |
| 16 | AHB | power_in | Phase A high-side bias connection; connect the bootstrap diode cathode and the positive side of the bootstrap capacitor here. |
| 17 | AHO | output | Phase A high-side gate drive output, to be connected to the gate of the phase A high-side power MOSFET. |
| 18 | AHS | passive | Phase A high-side source connection; connect to the high-side MOSFET source and the negative side of the bootstrap capacitor. |
| 19 | CLO | output | Phase C low-side gate drive output, to be connected to the gate of the phase C low-side power MOSFET. |
| 20 | VDD | power_in | Positive supply, specified at 7V to 15V relative to VSS; decouple this pin to VSS (pin 6). |
| 21 | ALO | output | Phase A low-side gate drive output, to be connected to the gate of the phase A low-side power MOSFET. |
| 22 | BLO | output | Phase B low-side gate drive output, to be connected to the gate of the phase B low-side power MOSFET. |
| 23 | BHS | passive | Phase B high-side source connection; connect to the high-side MOSFET source and the negative side of the bootstrap capacitor. |
| 24 | BHO | output | Phase B high-side gate drive output, to be connected to the gate of the phase B high-side power MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOIC-24-300mil |
| Category | Power Management ICs |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Quiescent Current | 2.7 | 3.4 | 4.2 | mA | xHI = 5V, xLI = 5V (HIP4086); TJ = +25°C | 5 | |
| VDD Quiescent Current | 2.1 | 4.3 | mA | xHI = 5V, xLI = 5V (HIP4086); TJ = -40°C to +150°C | 5 | ||
| VDD Operating Current | 6.3 | 8.25 | 10.5 | mA | f = 20kHz, 50% Duty Cycle (HIP4086); TJ = +25°C | 5 | |
| VDD Operating Current | 5 | 11 | mA | f = 20kHz, 50% Duty Cycle (HIP4086); TJ = -40°C to +150°C | 5 | ||
| xHB On Quiescent Current | 40 | 80 | µA | xHI = 0V (HIP4086); TJ = +25°C | 5 | ||
| xHB On Quiescent Current | 100 | µA | xHI = 0V (HIP4086); TJ = -40°C to +150°C | 5 | |||
| xHB Off Quiescent Current | 0.6 | 0.8 | 1.3 | mA | xHI = VDD (HIP4086); TJ = +25°C | 5 | |
| xHB Off Quiescent Current | 0.5 | 1.4 | mA | xHI = VDD (HIP4086); TJ = -40°C to +150°C | 5 | ||
| xHB Operating Current | 0.7 | 0.9 | 1.3 | mA | f = 20kHz, 50% Duty Cycle (HIP4086); TJ = +25°C | 5 | |
| xHB Operating Current | 2 | mA | f = 20kHz, 50% Duty Cycle (HIP4086); TJ = -40°C to +150°C | 5 | |||
| xHB, xHS Leakage Current | 7 | 24 | 45 | µA | VxHS = 80V, VxHB = 93V; TJ = +25°C | 5 | |
| xHB, xHS Leakage Current | 50 | µA | VxHS = 80V, VxHB = 93V; TJ = -40°C to +150°C | 5 | |||
| QPUMP Output Voltage | 11.5 | 12.5 | 14 | V | No Load (HIP4086 only); TJ = +25°C | 5 | |
| QPUMP Output Voltage | 10.5 | 14.5 | V | No Load (HIP4086 only); TJ = -40°C to +150°C | 5 | ||
| QPUMP Output Current | 50 | 100 | 130 | µA | VxHS = 12V, VxHB = 22V (HIP4086 only); TJ = +25°C | 5 | |
| QPUMP Output Current | 140 | µA | VxHS = 12V, VxHB = 22V (HIP4086 only); TJ = -40°C to +150°C | 5 | |||
| VDD Rising Undervoltage Threshold | 6.2 | 7.1 | 8 | V | RUV open; TJ = +25°C | 5 | |
| VDD Rising Undervoltage Threshold | 6.1 | 8.1 | V | RUV open; TJ = -40°C to +150°C | 5 | ||
| VDD Falling Undervoltage Threshold | 5.75 | 6.6 | 7.5 | V | RUV open; TJ = +25°C | 5 | |
| VDD Falling Undervoltage Threshold | 5.6 | 7.6 | V | RUV open; TJ = -40°C to +150°C | 5 | ||
| Minimum Undervoltage Threshold | 5 | 6.2 | 6.8 | V | RUV = VDD; TJ = +25°C | 5 | |
| Minimum Undervoltage Threshold | 4.9 | 6.9 | V | RUV = VDD; TJ = -40°C to +150°C | 5 | ||
| Low Level Input Voltage | 1 | V | Inputs xLI, xHI, DIS; TJ = +25°C | 5 | |||
| Low Level Input Voltage | 0.8 | V | Inputs xLI, xHI, DIS; TJ = -40°C to +150°C | 5 | |||
| High Level Input Voltage | 2.5 | V | Inputs xLI, xHI, DIS; TJ = +25°C | 6 | |||
| High Level Input Voltage | 2.7 | V | Inputs xLI, xHI, DIS; TJ = -40°C to +150°C | 6 | |||
| Low Level Input Current | -60 | -100 | -135 | µA | VIN = 0V; TJ = +25°C | 6 | |
| Low Level Input Current | -55 | -140 | µA | VIN = 0V; TJ = -40°C to +150°C | 6 | ||
| Low Level Output Voltage | VOUT - VSS | 200 | mV | ISINKING = 30mA; TJ = -40°C to +150°C | 6 | ||
| Peak Turn-On Current | 0.3 | 0.5 | 0.7 | A | VOUT = 0V; TJ = +25°C | 6 | |
| Peak Turn-On Current | 1 | A | VOUT = 0V; TJ = -40°C to +150°C | 6 | |||
| Dead Time | 3.8 | 4.5 | 6 | µs | RDEL = 100kΩ; TJ = +25°C | 6 | |
| Dead Time | 37 | µs | RDEL = 100kΩ; TJ = -40°C to +150°C | 6 | |||
| Dead Time | 0.38 | 0.5 | 0.65 | µs | RDEL = 10kΩ; TJ = +25°C | 6 | |
| Dead Time | 0.3 | 0.7 | µs | RDEL = 10kΩ; TJ = -40°C to +150°C | 6 | ||
| Lower Turn-Off Propagation Delay (xLI to xLO turn-off) | 30 | 45 | ns | No Load (Figure 3 or 4); TJ = +25°C | 6 | ||
| Lower Turn-Off Propagation Delay (xLI to xLO turn-off) | 65 | ns | No Load (Figure 3 or 4); TJ = -40°C to +150°C | 6 | |||
| Upper Turn-Off Propagation Delay (xHI to xHO turn-off) | 75 | 90 | ns | No Load (Figure 3 or 4); TJ = +25°C | 6 | ||
| Upper Turn-Off Propagation Delay (xHI to xHO turn-off) | 100 | ns | No Load (Figure 3 or 4); TJ = -40°C to +150°C | 6 | |||
| Lower Turn-On Propagation Delay (xLI to xLO turn-on) | 45 | 75 | ns | No Load (Figure 3 or 4); TJ = +25°C | 6 | ||
| Lower Turn-On Propagation Delay (xLI to xLO turn-on) | 90 | ns | No Load (Figure 3 or 4); TJ = -40°C to +150°C | 6 | |||
| Upper Turn-On Propagation Delay (xHI to xHO turn-on) | 65 | 90 | ns | No Load (Figure 3 or 4); TJ = +25°C | 6 | ||
| Upper Turn-On Propagation Delay (xHI to xHO turn-on) | 100 | ns | No Load (Figure 3 or 4); TJ = -40°C to +150°C | 6 | |||
| Rise Time | 20 | 40 | ns | CGATE = 1000pF; TJ = +25°C | 6 | ||
| Rise Time | 50 | ns | CGATE = 1000pF; TJ = -40°C to +150°C | 6 | |||
| Fall Time | 10 | 20 | ns | CGATE = 1000pF; TJ = +25°C | 6 | ||
| Fall Time | 25 | ns | CGATE = 1000pF; TJ = -40°C to +150°C | 6 | |||
| Disable Turn-Off Propagation Delay (DIS to xLO turn-off) | 55 | 80 | ns | Figure 5; TJ = +25°C | 6 | ||
| Disable Turn-Off Propagation Delay (DIS to xLO turn-off) | 90 | ns | Figure 5; TJ = -40°C to +150°C | 6 | |||
| Disable Turn-Off Propagation Delay (DIS to xHO turn-off) | 80 | 90 | ns | Figure 5; TJ = +25°C | 6 | ||
| Disable Turn-Off Propagation Delay (DIS to xHO turn-off) | 100 | ns | Figure 5; TJ = -40°C to +150°C | 6 | |||
| Supply Voltage, VDD Relative to GND | VDD | -0.3 | 16 | V | 5 | ||
| Voltage on xHS | VxHS | -6 | 85 | V | -6V transient; 85V at -40°C to +150°C | 5 | |
| Phase slew rate (on xHS) | 20 | V/ns | 5 | ||||
| Supply Voltage, VDD Relative to GND | VDD | 7 | 15 | V | 5 | ||
| Voltage on xHS | VxHS | 0 | 80 | V | 5 | ||
| Ambient Temperature Range | -40 | 125 | °C | 5 | |||
| Junction Temperature Range | -40 | 150 | °C | 5 | |||
| Thermal Resistance, SOIC Package (Notes 4, 6) | θJA | 75 | °C/W | Typical; low effective thermal conductivity test board, free air (Note 4) | 5 | ||
| Thermal Resistance, SOIC Package (Notes 4, 6) | θJC | 22 | °C/W | Typical; case temp at package top center (Note 6) | 5 |
CAD (KiCad official)
- Symbol:
HIP4086ABZT - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files:
hip4086abzt-etched.step/hip4086abzt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hip4086abzt.step/hip4086abzt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (16 pp, sha256
2868480685553964, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).