Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS78511QKVURQ1

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-4

TPS78511QKVURQ1 from Texas Instruments, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Active-high enable: driving above VEN(HI) (0.9 V typical) enables the device and below VEN(LOW) (0.3 V) disables it, with the recommended EN voltage range 0 V to 6 V; do not float this pin, and connect EN to IN if shutdown is not used.
2 IN power_in Input supply pin, with an input voltage range of 1.7 V to 6.0 V; place a 0.1 µF to 1 µF (nominal recommended value or larger) ceramic capacitor from IN to GND as close to the device as possible.
3 GND power_in Ground pin that must be connected to board ground; the thermal pad is electrically connected to this pin.
4 OUT power_out Regulated output with up to 1 A output current; a minimum of 0.47 µF effective capacitance to ground is required for stability, and a 1 µF or larger ceramic capacitor is recommended for best transient response, placed as close to the pin as possible.
5 NC unconnected No-connect pin on the fixed-voltage version that is not internally connected; connect to ground for best thermal performance or leave floating.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-252-4
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 1.7 6 V 7
Output voltage (fixed output) VOUT 0.65 5 V Fixed output 7
Output accuracy VOUT -0.5 0.5 % 1 mA ≤ IOUT ≤ 1 A; VOUT(nom) + 0.75 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; TJ = 25°C 7
Output accuracy VOUT -1 1 % 1 mA ≤ IOUT ≤ 1 A; VOUT(nom) + 0.75 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C 7
Output accuracy VOUT -1.7 1.7 % 1 mA ≤ IOUT ≤ 1 A; VOUT(nom) + 0.75 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C 7
Load regulation VOUT -7.5 7.5 mV 0.1 mA ≤ IOUT ≤ 1 A; -40°C ≤ TJ ≤ 85°C 7
Load regulation VOUT -7.5 15 mV 0.1 mA ≤ IOUT ≤ 1 A, -40°C ≤ TJ ≤ 150°C; VOUT ≤ 3.3 V 7
Ground current IGND 15 25 33 µA IOUT = 0 mA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; TJ = 25°C 7
Ground current IGND 35 µA IOUT = 0 mA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C 7
Ground current IGND 40 µA IOUT = 0 mA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C 7
Ground current IGND 33 44 µA IOUT = 500 µA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; TJ = 25°C 7
Ground current IGND 47 µA IOUT = 500 µA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C 7
Ground current IGND 50 µA IOUT = 500 µA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C 7
Ground current IGND 45 µA IOUT = 100 µA; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C 7
Shutdown current ISHDN 0.01 0.05 µA VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; TJ = 25°C 7
Shutdown current ISHDN 0.25 µA VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 85°C 7
Shutdown current ISHDN 3 µA VEN ≤ 0.3 V; VOUT(nom) + 0.5 V or 2.0 V (whichever is greater) ≤ VIN ≤ 6.0 V; -40°C ≤ TJ ≤ 150°C 7
Output current limit ICL 1.04 1.65 A VIN = VOUT(nom) + 1.25 V or 2.0 V (whichever is greater); VOUT = 0.9 x VOUT(nom) 7
Dropout voltage (KVU package) VDO 915 mV 1.0 V ≤ VOUT < 1.2 V; IOUT = 1 A, VOUT = 0.95 x VOUT(nom) 8
UVLO threshold, VIN rising VUVLO 1.28 1.42 1.62 V VIN rising 8
UVLO threshold, VIN falling VUVLO 1.17 1.29 1.42 V VIN falling 8
Start-up time tSTR 280 550 785 µs From EN low-to-high transition to VOUT = VOUT(nom) x 92% 8
EN pin logic high voltage VEN(HI) 0.9 V 8
EN pin logic low voltage VEN(LOW) 0.3 V 8
Input voltage VIN 1.7 6 V 6
Output voltage (fixed output) VOUT 0.65 5 V Fixed output 6
Input capacitor CIN 0.1 1 µF 6
Output capacitor COUT 1 200 µF Minimum effective capacitance is 0.47 µF 6
Feed-forward capacitor CFF 0 10 100 nF Optional, not required for stability 6
Output current IOUT 0 1 A 6
Output capacitor ESR COUT,ESR 0.001 1 Ω 6
Enable voltage VEN 0 6 V 6
Operating junction temperature TJ -40 150 °C 6
Supply voltage VIN -0.3 6.5 V 5
Enable voltage VEN -0.3 6.5 V 5
Output voltage VOUT -0.3 V Maximum is VIN + 0.3 V or 6.5 V, whichever is smaller 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Junction-to-ambient thermal resistance (KVU, TO-252) RθJA 31.6 °C/W KVU (TO-252), 5 pins 6
Junction-to-case (top) thermal resistance (KVU) RθJC(top) 40.4 °C/W KVU (TO-252), 5 pins 6
Junction-to-board thermal resistance (KVU) RθJB 10.4 °C/W KVU (TO-252), 5 pins 6
Junction-to-top characterization parameter (KVU) ψJT 4.6 °C/W KVU (TO-252), 5 pins 6
Junction-to-board characterization parameter (KVU) ψJB 10.3 °C/W KVU (TO-252), 5 pins 6
Junction-to-case (bottom) thermal resistance (KVU) RθJC(bot) 3.3 °C/W KVU (TO-252), 5 pins 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper ground plane on the layer directly underneath the LDO circuitry and FB pin to minimize any undesirable 28

CAD (KiCad official)

  • Symbol: TPS78511QKVURQ1
  • Footprint: Package_TO_SOT_SMD:TO-252-4
  • 3D model: TO-252-4 (KiCad packages3D, STEP)
  • 3D model files: tps78511qkvurq1-etched.step / tps78511qkvurq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps78511qkvurq1.step / tps78511qkvurq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 8d1b76473f2a1cce, retrieved 2026-11-10, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF