3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPCC-SMD-20
Omega Engineering · Sensors, Transducers · PCC-SMD (single SMT thermocouple contact clip)
PCC-SMD-20 from Omega Engineering, in a PCC-SMD (single SMT thermocouple contact clip). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | thermocouple/RTD contact clip; use in pairs |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Omega Engineering |
| Package | PCC-SMD (single SMT thermocouple contact clip) |
| Category | Sensors, Transducers |
| Pins | 1 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | -50 | 120 | °C | Ambient operating temperature range; higher with high temp PCB | 1 |
CAD (Adom-generated)
- Symbol:
PCC-SMD-20 - Footprint:
Adom_Gen:Omega_Engineering_PCC-SMD-_c8a659 - 3D model: generated to fit the land (STEP)
- 3D model files:
pcc-smd-20-etched.step/pcc-smd-20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcc-smd-20.step/pcc-smd-20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Omega Engineering datasheet, copy hosted by Farnell (2 pp, sha256
ec3b36d51ba29a99, retrieved 2026-11-20) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Omega PCC-SMD sheet p.2 'BARE PCB', right-hand clip, coordinates from the pair centreline (x) and PCB edge (y): copper pad x 1.60-5.87, y 0.50-9.50 plus side tab x 5.87-7.21, y 2.84-7.16 (one piece, tiled as 4 rects all named 1). Slot in the tab, 1.0 x 3.25 (y 3.38-6.63), inside the copper: a plated oval slot on pad 1. Top slot x 2.09-6.09, y 9.77-11.27 (4.0 x 1.5): the print shows no copper there, so it is a non-plated oval slot (NPTH, no net). The print's R0.40 slot corners are drawn as full oval ends (KiCad oval drill), 0.1-0.2 mm off the drawn outline. The optional flush-mount third slot on p.2 is left out. Footprint origin = main pad centre (x 3.735, y 5.00). Left clip of a pair is this land rotated 180 deg. Body 5.29 (13.21-7.92, p.1) x 11.94 (p.1) x 2.37 (p.1), front 1.0 past the PCB edge (p.2 side view). Paste: whole pad; maker paste profile on p.2.