3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLESDA6V1LLT1G
LRC · ESD Protection Devices · SOT-23
LESDA6V1LLT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I/O1 | passive | Unidirectional TVS (transil) channel 1 anode-side input to protect a data line, clamping positive transients just above the logic supply (VBR 6.1 V min to 7.2 V max) and negative transients to a diode drop below ground; usable with pin 2 as a bidirectional suppressor. |
| 2 | I/O2 | passive | Unidirectional TVS (transil) channel 2 input to protect a second data line, with VBR 6.1 V min to 7.2 V max; connecting only pins 1 and 2 gives a bidirectional suppressor. |
| 3 | GND | power_in | Common ground connection shared by both transil functions, tied to the circuit ground in the application diagram. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23 |
| Category | TVS/Fuse/Board Level Protection |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Breakdown voltage | VBR | 6.1 | 7.2 | V | IR 1 mA | 2 | |
| Leakage current | IRM | 20 | µA | 2 | |||
| Peak pulse current | IPP | 18 | A | 2 | |||
| Clamping voltage | VC | 11.5 | V | IPP = 5 A | 2 | ||
| Clamping voltage | VC | 16 | V | IPP = 18 A | 2 | ||
| Peak pulse power | PPP | 300 | W | tp = 8/20 µs | 1 | ||
| Maximum lead temperature for soldering | TL | 260 | °C | during 10 s | 1 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | 1 | ||
| Operating temperature range | Top | -40 | 125 | °C | 1 | ||
| Maximum junction temperature | Tj | 150 | °C | 1 | |||
| ESD withstand, human body model | 25 | kV | MIL STD 883C Method 3015-6 | 1 | |||
| ESD withstand, IEC61000-4-2 air discharge | VPP | 16 | kV | IEC61000-4-2 air discharge | 1 | ||
| ESD withstand, IEC61000-4-2 contact discharge | VPP | 9 | kV | IEC61000-4-2 contact discharge | 1 | ||
| Stand-off voltage | VRM | 5.25 | V | 2 | |||
| Forward voltage drop | VF | 1.25 | V | IF = 200 mA | 2 | ||
| Dynamic resistance | Rd | 350 | mΩ | square pulse IPP = 15 A, tp = 2.5 µs | 2 | ||
| Voltage temperature coefficient | αT | 6 | 10-4/°C | 2 | |||
| Capacitance | C | 140 | pF | 0 V bias | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LESDA6V1LLT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lesda6v1llt1g-etched.step/lesda6v1llt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lesda6v1llt1g.step/lesda6v1llt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (6 pp, sha256
e991212a58edd027, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).