3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC32MX230F256B-50I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC32MX230F256B-50I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; pulling this active-low pin low generates a device Reset, and it is also used for programming and debugging. |
| 2 | PGED3/VREF+/CVREF+/AN0/C3INC/RPA0/CTED1/PMD7/RA0 | bidirectional | Analog voltage reference (high) input VREF+; also PGED3 programming/debug data I/O, analog input AN0, and PORTA bidirectional I/O pin RA0 (ST buffer). |
| 3 | PGEC3/VREF-/CVREF-/AN1/RPA1/CTED2/PMD6/RA1 | bidirectional | Analog voltage reference (low) input VREF-; also PGEC3 programming/debug clock input, analog input AN1, and PORTA bidirectional I/O pin RA1 (ST buffer). |
| 4 | PGED1/AN2/C1IND/C2INB/C3IND/RPB0/PMD0/RB0 | bidirectional | PGED1 programming/debug data I/O for Channel 1; also analog input AN2, comparator inputs, and PORTB bidirectional I/O pin RB0 (ST buffer). |
| 5 | PGEC1/AN3/C1INC/C2INA/RPB1/CTED12/PMD1/RB1 | bidirectional | PGEC1 programming/debug clock input for Channel 1; also analog input AN3, comparator inputs, and PORTB bidirectional I/O pin RB1 (ST buffer). |
| 6 | AN4/C1INB/C2IND/RPB2/SDA2/CTED13/PMD2/RB2 | bidirectional | Analog input AN4 and comparator input; also I2C2 data SDA2 and PORTB bidirectional I/O pin RB2 (ST buffer). |
| 7 | AN5/C1INA/C2INC/RTCC/RPB3/SCL2/PMWR/RB3 | bidirectional | Analog input AN5 and comparator input; also RTCC alarm output, I2C2 clock SCL2, and PORTB bidirectional I/O pin RB3 (ST buffer). |
| 8 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 9 | OSC1/CLKI/RPA2/RA2 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise), also serving as external clock source input CLKI; PORTA pin RA2 is also available as bidirectional I/O. |
| 10 | OSC2/CLKO/RPA3/PMA0/RA3 | output | Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode, optionally functioning as CLKO in RC and EC modes; PORTA pin RA3 is also available as bidirectional I/O. |
| 11 | SOSCI/RPB4/RB4 | bidirectional | 32.768 kHz low-power oscillator crystal input (ST/CMOS); also PORTB bidirectional I/O pin RB4 (ST buffer). |
| 12 | SOSCO/RPA4/T1CK/CTED9/PMA1/RA4 | output | 32.768 kHz low-power oscillator crystal output; also Timer1 external clock input T1CK and PORTA bidirectional I/O pin RA4 (ST buffer). |
| 13 | VDD | power_in | Positive supply for peripheral logic and I/O pins, operating from 2.3V to 3.6V. |
| 14 | TMS/RPB5/USBID/RB5 | bidirectional | JTAG Test Mode Select input (ST buffer); also USB OTG ID detect input USBID and PORTB bidirectional I/O pin RB5 (ST buffer). |
| 15 | VBUS | power_in | USB bus power monitor analog input. |
| 16 | TDI/RPB7/CTED3/PMD5/INT0/RB7 | input | JTAG test data input pin; also external interrupt INT0 and PORTB bidirectional I/O pin RB7 (ST buffer). |
| 17 | TCK/RPB8/SCL1/CTED10/PMD4/RB8 | bidirectional | JTAG test clock input (ST buffer); also I2C1 clock SCL1 and PORTB bidirectional I/O pin RB8 (ST buffer). |
| 18 | TDO/RPB9/SDA1/CTED4/PMD3/RB9 | bidirectional | JTAG test data output pin; also I2C1 data SDA1 and PORTB bidirectional I/O pin RB9 (ST buffer). |
| 19 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 20 | VCAP | power_in | CPU logic filter capacitor connection; it must not be connected to VDD and requires a low-ESR (3 ohm) CEFC capacitor rated at least 6V connected to ground. |
| 21 | PGED2/RPB10/D+/CTED11/RB10 | bidirectional | PGED2 programming/debug data I/O for Channel 2; also USB D+ analog I/O and PORTB bidirectional I/O pin RB10 (ST buffer). |
| 22 | PGEC2/RPB11/D-/RB11 | bidirectional | PGEC2 programming/debug clock input for Channel 2; also USB D- analog I/O and PORTB bidirectional I/O pin RB11 (ST buffer). |
| 23 | VUSB3V3 | power_in | USB internal transceiver supply; this pin must be connected to VDD. |
| 24 | AN11/RPB13/CTPLS/PMRD/RB13 | bidirectional | Analog input AN11; also CTMU pulse output CTPLS and PORTB bidirectional I/O pin RB13 (ST buffer). |
| 25 | CVREFOUT/AN10/C3INB/RPB14/VBUSON/SCK1/CTED5/RB14 | bidirectional | Comparator Voltage Reference output CVREFOUT; also analog input AN10, USB Host/OTG bus power control output VBUSON, SPI1 clock SCK1, and PORTB bidirectional I/O pin RB14 (ST buffer). |
| 26 | AN9/C3INA/RPB15/SCK2/CTED6/PMCS1/RB15 | bidirectional | Analog input AN9 and comparator input; also SPI2 clock SCK2 and PORTB bidirectional I/O pin RB15 (ST buffer). |
| 27 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times, even if the ADC module is not used. |
| 28 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times, even if the ADC module is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | 2.3 | 3.6 | V | -40ºC to +85ºC, DC to 50 MHz (Operating Conditions, -50I line) | 1 | ||
| Operating temperature | -40 | 85 | ºC | 2.3V to 3.6V, DC to 50 MHz | 1 | ||
| Operating frequency | 50 | MHz | 2.3V to 3.6V, -40ºC to +85ºC | 1 | |||
| Power-down current | IPD | 44 | μA | 1 | |||
| Dynamic current | 0.5 | mA/MHz | 1 | ||||
| Voltage on 5V-tolerant pins (VDD < 2.3V, relative to VSS) | 3.2 | V | VDD < 2.3V; printed as 'roughly 3.2V' relative to VSS | 34 |
CAD (KiCad official)
- Symbol:
PIC32MX230F256B-50I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic32mx230f256b-50i-etched.step/pic32mx230f256b-50i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx230f256b-50i.step/pic32mx230f256b-50i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (350 pp, sha256
6f75ee8fe58045ff, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).