component
LM2852YMXA-2.5
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM2852YMXA-2.5
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM2852YMXA-2.5 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | power_in | Chip bias input pin providing power to the logic of the chip; connect to input voltage or separate rail. |
| 2 | EN | input | Enable pin; connect to ground to disable chip, or to AVIN or leave floating to enable; internally pulled up. |
| 3 | SGND | power_in | Signal ground. |
| 4 | SS | input | Soft-start pin; connect to small capacitor (1 nF to 50 nF range) to control startup transient. |
| 5 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 6 | PVIN | power_in | Input supply pin connected to input voltage; this rail connects to source of internal power PFET. |
| 7 | PVIN | power_in | Input supply pin connected to input voltage; this rail connects to source of internal power PFET. |
| 8 | SW | output | Switch pin; connect to output inductor. |
| 9 | SW | output | Switch pin; connect to output inductor. |
| 10 | PGND | power_in | Power ground; connect to internal ground plane or other large ground plane. |
| 11 | PGND | power_in | Power ground; connect to internal ground plane or other large ground plane. |
| 12 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 13 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 14 | SNS | output | Output voltage sense pin; connect to output voltage as close to load as possible. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM2852YMXA-2.5 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm2852ymxa-2-5-etched.step/lm2852ymxa-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2852ymxa-2-5.step/lm2852ymxa-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
2216cf1c2aebddd4, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).