component
TPS2375PW
Public Made by Adomby adom
Texas Instruments Power Over Ethernet (PoE) Controllers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2375PW
Texas Instruments · Power Over Ethernet (PoE) Controllers · TSSOP-8
TPS2375PW from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ILIM | passive | Connect a resistor from ILIM to VSS to set the start-up inrush current limit, with practical R(ILIM) limits of 62.5 kΩ to 500 kΩ, and the pin must not be left open or shorted to VSS. |
| 2 | CLASS | passive | Connect an external classification resistor from CLASS to VSS (255 Ω to 4420 Ω per the recommended operating conditions) to set the IEEE 802.3af PD class, and the pin must not be shorted to ground. |
| 3 | DET | passive | Connect a 24.9 kΩ ±1% detection resistor from DET to VDD for valid PD detection; it is connected across the input only when V(VDD) is between 1.4 V and 11.3 V. |
| 4 | VSS | power_in | Input supply negative rail and local ground for the TPS2375, serving as the return line on the source side from the PSE. |
| 5 | RTN | power_out | Switched negative power rail for downstream circuits, with a recommended sinking operating current range of 0 to 350 mA and an absolute maximum of 515 mA. |
| 6 | PG | output | Open-drain, active-high power-good output pulled to RTN in all states except detection, with recommended sinking current of 0 to 2 mA, and it requires a pullup resistor or other interface. |
| 7 | NC | unconnected | No connection on the TPS2375 (and TPS2377); pin 7 is the UVLO input only on the TPS2376. |
| 8 | VDD | power_in | Positive input supply from the rectified PSE input, with absolute maximum V(VDD-VSS) of 100 V and recommended input range of 0 to 57 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS2375PW - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tps2375pw-etched.step/tps2375pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2375pw.step/tps2375pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
6559d81e1161e551, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).