Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ZRC330F01TA

Diodes Incorporated · Voltage References · SOT-23

ZRC330F01TA from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 NC unconnected Pin 1 is to be left floating or connected to pin 2, as stated in the datasheet pin assignment note.
2 GND power_in Ground reference pin of the 3.3 V reference; the datasheet pin assignment labels it GND and allows pin 1 to be connected to it.
3 VR passive Reference voltage pin, with 3.3 V reverse breakdown voltage (VR) at IR = 150µA and a recommended operating current of 0.02 to 5 mA, and an absolute maximum reverse current of 25 mA.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-23
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse breakdown voltage (1% grade, ZRC330F01TA) VR 3.27 3.3 3.33 V IR = 150µA; Tol 1% 2
Minimum operating current IMIN 15 20 µA 2
Recommended operating current IR 0.02 5 mA 2
Average reverse breakdown voltage temperature coefficient TC 15 50 ppm/°C IR(MIN) to IR(MAX) 2
Slope resistance RS 0.6 2 Ω 2
Reverse dynamic impedance ZR 0.5 1.2 Ω IR = 1mA; f = 100Hz; IAC = 0.1IR 2
Wideband noise voltage EN 75 µV(rms) IR = 150µA; f = 10Hz to 10kHz 2
Initial voltage tolerance (ordering Tol code 1) -1 1 % Part suffix F01 = 1% tolerance per ordering information 4
Reverse current 25 mA 2
Forward current 25 mA 2
Operating temperature -40 85 °C 2
Storage temperature -55 125 °C 2
Power dissipation (SOT23) 330 mW TAMB = 25°C 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ZRC330F01TA
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: zrc330f01ta-etched.step / zrc330f01ta-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zrc330f01ta.step / zrc330f01ta.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (5 pp, sha256 422455e444cb7ccd, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF