Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HIN202CBZ-T

RENESAS · Pre-ordered Chips · SOIC-16-300mil

HIN202CBZ-T from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive External capacitor (+ terminal) is connected to this lead.
2 V+ power_out Internally generated positive supply, +10V nominal.
3 C1- passive External capacitor (- terminal) is connected to this lead.
4 C2+ passive External capacitor (+ terminal) is connected to this lead.
5 C2- passive External capacitor (- terminal) is connected to this lead.
6 V- power_out Internally generated negative supply, -10V nominal.
7 T2OUT output Transmitter output at RS-232 levels, nominally 10V, short-circuit protected and can be shorted to ground indefinitely.
8 R2IN input Receiver input accepts RS-232 input levels (-30V to +30V) and has an internal 5k pull-down resistor to GND.
9 R2OUT output Receiver output at TTL/CMOS levels (0V to VCC).
10 T2IN input Transmitter input accepts TTL/CMOS levels and has an internal 400k pull-up resistor to VCC.
11 T1IN input Transmitter input accepts TTL/CMOS levels and has an internal 400k pull-up resistor to VCC.
12 R1OUT output Receiver output at TTL/CMOS levels (0V to VCC).
13 R1IN input Receiver input accepts RS-232 input levels (-30V to +30V) and has an internal 5k pull-down resistor to GND.
14 T1OUT output Transmitter output at RS-232 levels, nominally 10V, short-circuit protected and can be shorted to ground indefinitely.
15 GND power_in Ground lead; connect to 0V.
16 VCC power_in Power supply input, 5V ±10% (5V ±5% for HIN207).

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature range HIN2XXCX (C grade, applies to HIN202CBZ-T) 0 70 °C HIN2XXCX 7
VCC to ground VCC -0.3 6 V (GND -0.3V) < VCC < 6V 7
V+ to ground V+ 12 V Lower limit printed as (VCC -0.3V) < V+ 7
V- to ground V- -12 V Upper limit printed as V- < (GND +0.3V) 7
TIN input voltage VIN -0.3 V TIN; upper limit printed as (V+ +0.3V) 7
RIN input voltage 30 V RIN; printed as 30V with no sign 7
ROUT output voltage VRXOUT -0.3 V ROUT; upper limit printed as (V+ +0.3V) 7
Maximum junction temperature (plastic package) 150 °C Plastic package 7
Maximum storage temperature range -65 150 °C 7
Maximum lead temperature (soldering) 300 °C 10s; SOIC and SSOP lead tips only 7
Supply voltage VCC VCC 5 V +5V ±10% (test condition) 7
Input logic high, TIN VIH 2 V 7
Input logic high, EN, SD, EN, SD VIH 2.4 V 7
Input logic low, TIN, EN, SD, EN, SD VIL 0.8 V 7
Receiver input high threshold, active mode VIN(L-H) 1.7 2.4 V VCC = 5V, TA = 25°C, Active Mode 7
Receiver input low threshold, active mode VIN(H-L) 0.8 1.2 V VCC = 5V, TA = 25°C, Active Mode 7
Receiver input hysteresis VHYST 0.2 0.5 1 V VCC = 5V; no hysteresis in shutdown mode 7
Receiver input impedance RIN 3 5 7 kΩ TA = 25°C, VIN = 3V 7
RS-232 input voltage range VIN -30 30 V 7
TTL/CMOS receiver output voltage high VOH 3.5 4.6 V IOUT = -1mA 7
TTL/CMOS receiver output voltage low VOL 0.1 0.4 V IOUT = 1.6mA (HIN202, IOUT = 3.2mA) 7
TTL/CMOS receiver output leakage 0.05 10 µA EN = VCC, EN = 0, 0V < ROUT < VCC 7
Transmitter input pullup current IP 15 200 µA TIN = 0V 7
Power supply current, no load ICC 8 15 mA No Load, TA = 25°C; HIN202 7
Baud rate, 1 transmitter switching 120 kbps RL = 3k; 1 Transmitter Switching 8
Transmitter, receiver propagation delay tPD 0.5 10 µs HIN202, HIN206, HIN207, HIN208, HIN211 8
Transition region slew rate SRT 3 30 V/µs RL = 3k, CL = 2500pF; measured from +3V to -3V or -3V to +3V; 1 Transmitter Switching (Note 2) 8
Output voltage swing, transmitter outputs TOUT 5 9 10 V Transmitter outputs, 3k to Ground 8
Output resistance, transmitter outputs (power off) 300 Ω VCC = V+ = V- = 0V, VOUT = 2V 8
RS-232 output short circuit current ISC 10 mA TOUT shorted to GND 8
Thermal resistance junction to ambient, 16 Ld SOIC (W) JA 100 °C/W Typical, Note 1; 16 Ld SOIC (W) package 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin C2- External capacitor (- terminal) is connected to this lead. TIN Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead. 3

CAD (KiCad official)

  • Symbol: HIN202CBZ-T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: hin202cbz-t-etched.step / hin202cbz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hin202cbz-t.step / hin202cbz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (20 pp, sha256 2589abb4fe7ec19d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF