Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RNU1C101MDSASQ

Nichicon · Capacitors · Radial, Can

RNU1C101MDSASQ from Nichicon, in a Radial, Can. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 + passive Positive lead (anode), marked circled + on the maker's dimension drawing; φd 0.5 mm wire, P 2.5 mm; 100 µF, 16 V, φ6.3×10 mm.
2 - passive Negative lead (cathode), marked circled - on the maker's dimension drawing (the case's minus-stripe side).

Key specifications

Parameter Value
Manufacturer Nichicon
Package Radial, Can
Category Capacitors
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated capacitance 100 µF 120Hz, 20°C 2
Capacitance tolerance -20 20 % 120Hz, 20°C 1
Rated voltage 16 V 2
Surge voltage 18.4 V 2
Tangent of loss angle (tan δ) tan δ 0.08 120Hz, 20°C 2
Leakage current 320 µA 20°C, after 2 minutes 2
ESR ESR 25 mΩ 100kHz, 20°C 2
Rated ripple current 2820 mArms 105°C, 100kHz 2
Category temperature range TA -55 105 °C 1
Capacitance change after endurance -20 20 % 105°C, rated voltage, 2000/5000 h 1
Tangent of loss angle after endurance tan δ 150 % 105°C, rated voltage, 2000/5000 h, relative to initial specified value 1

CAD (Adom-generated)

  • Symbol: RNU1C101MDSASQ
  • Footprint: Adom_Gen:Nichicon_RNU1_f37717
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nichicon datasheet (3 pp, sha256 35259774959a67fe, retrieved 2026-11-21)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF