component
MCP604T-I
Public Made by Adomby adom
Microchip Tech Operational Amplifier, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP604T-I
Microchip Tech · Operational Amplifier · SOIC-14
MCP604T-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Output of amplifier A; linear output swing is VSS+100 mV to VDD-100 mV at a 25 kΩ load to VDD/2, and short-circuit current is ±22 mA at VDD = 5.5 V. |
| 2 | VINA- | input | Inverting input of amplifier A; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA (use a series RIN if exceeded). |
| 3 | VINA+ | input | Non-inverting input of amplifier A; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 4 | VDD | power_in | Positive supply, 2.7 V to 5.5 V single-supply operation; VDD-VSS must not exceed the 7.0 V absolute maximum rating. |
| 5 | VINB+ | input | Non-inverting input of amplifier B; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 6 | VINB- | input | Inverting input of amplifier B; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 7 | VOUTB | output | Output of amplifier B; linear output swing is VSS+100 mV to VDD-100 mV at a 25 kΩ load to VDD/2. |
| 8 | VOUTC | output | Output of amplifier C; linear output swing is VSS+100 mV to VDD-100 mV at a 25 kΩ load to VDD/2. |
| 9 | VINC- | input | Inverting input of amplifier C; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 10 | VINC+ | input | Non-inverting input of amplifier C; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 11 | VSS | power_in | Negative supply, tied to GND in single-supply operation; the input common-mode range extends 0.3 V below VSS. |
| 12 | VIND+ | input | Non-inverting input of amplifier D; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 13 | VIND- | input | Inverting input of amplifier D; the input must stay within the common-mode range VSS-0.3 V to VDD-1.2 V, and input pin current must be limited to ±2 mA. |
| 14 | VOUTD | output | Output of amplifier D; linear output swing is VSS+100 mV to VDD-100 mV at a 25 kΩ load to VDD/2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
MCP604T-I - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mcp604t-i-etched.step/mcp604t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp604t-i.step/mcp604t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
50a461af34f4728e, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).