Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F2420T-I

Microchip Tech · MICROCHIP · SOIC-28-300mil

PIC18F2420T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input, programming voltage (VPP) input, or digital input RE3 when MCLR is disabled via the MCLRE configuration bit.
2 RA0/AN0 bidirectional PORTA digital I/O (TTL input) or analog input 0.
3 RA1/AN1 bidirectional PORTA digital I/O (TTL input) or analog input 1.
4 RA2/AN2/VREF-/CVREF bidirectional PORTA digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output.
5 RA3/AN3/VREF+ bidirectional PORTA digital I/O, analog input 3, or A/D reference voltage (high) input.
6 RA4/T0CKI/C1OUT bidirectional PORTA digital I/O with Schmitt Trigger input, Timer0 external clock input, or comparator 1 output.
7 RA5/AN4/SS/HLVDIN/C2OUT bidirectional PORTA digital I/O, analog input 4, SPI slave select input, High/Low-Voltage Detect input, or comparator 2 output.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7.
10 OSC2/CLKO/RA6 output Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode (the instruction cycle rate), or general purpose I/O RA6.
11 RC0/T1OSO/T13CKI bidirectional PORTC digital I/O, Timer1 oscillator output, or Timer1/Timer3 external clock input.
12 RC1/T1OSI/CCP2 bidirectional PORTC digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (default CCP2 assignment when CCP2MX is set).
13 RC2/CCP1 bidirectional PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC digital I/O or synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL).
15 RC4/SDI/SDA bidirectional PORTC digital I/O, SPI data in, or I2C data I/O.
16 RC5/SDO bidirectional PORTC digital I/O or SPI data out.
17 RC6/TX/CK bidirectional PORTC digital I/O, EUSART asynchronous transmit, or EUSART synchronous clock.
18 RC7/RX/DT bidirectional PORTC digital I/O, EUSART asynchronous receive, or EUSART synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT0/FLT0/AN12 bidirectional PORTB digital I/O (weak pull-up capable), external interrupt 0, PWM Fault input for CCP1, or analog input 12.
22 RB1/INT1/AN10 bidirectional PORTB digital I/O (weak pull-up capable), external interrupt 1, or analog input 10.
23 RB2/INT2/AN8 bidirectional PORTB digital I/O (weak pull-up capable), external interrupt 2, or analog input 8.
24 RB3/AN9/CCP2 bidirectional PORTB digital I/O (weak pull-up capable), analog input 9, or Capture 2 input/Compare 2 output/PWM2 output when CCP2MX is cleared.
25 RB4/KBI0/AN11 bidirectional PORTB digital I/O (weak pull-up capable), interrupt-on-change pin, or analog input 11.
26 RB5/KBI1/PGM bidirectional PORTB digital I/O (weak pull-up capable), interrupt-on-change pin, or Low-Voltage ICSP programming enable pin.
27 RB6/KBI2/PGC bidirectional PORTB digital I/O (weak pull-up capable), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin.
28 RB7/KBI3/PGD bidirectional PORTB digital I/O (weak pull-up capable), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Frequency 40 MHz Table 1-1 prints 'DC, 40 MHz' for PIC18F2420 11
Operating VDD range (standard F device) VDD 4.2 5.5 V Standard 'F' device such as PIC18F2420, per Section 1.3 text 10
RC oscillator external resistor REXT 3 100 kΩ RC/RCIO oscillator mode, 'Recommended values' printed in Figure 2-5 27
RC oscillator external capacitor CEXT 20 pF RC/RCIO oscillator mode, printed as CEXT > 20 pF 27
MCLR pull-up resistor to VDD 1 10 kΩ Tie MCLR through resistor to VDD to eliminate external POR RC components 45
External POR circuit resistor R R 40 kΩ Figure 4-2 note 2: R < 40 kΩ recommended 45
MCLR series resistor R1 R1 1 kΩ Figure 4-2 note 3: R1 ≥ 1 kΩ to limit current into MCLR 45
A/D analog source impedance 2.5 kΩ Section 19.1: maximum recommended impedance for analog sources 230

CAD (KiCad official)

  • Symbol: PIC18F2420T-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18f2420t-i-etched.step / pic18f2420t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f2420t-i.step / pic18f2420t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (412 pp, sha256 6a14bfc9fe0bf10c, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF