component
TCAN1044VDRQ1
Public Unreviewedby Ray
Texas Instruments CAN ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTCAN1044VDRQ1
Texas Instruments · CAN ICs · SOIC-8
TCAN1044VDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | CAN transmit data input from the local protocol controller. Drives the bus dominant when low and recessive when high. Integrated pull-up to VIO (or VCC on non-V variant). |
| 2 | GND | power_in | Device ground reference. Connect to the system ground plane. |
| 3 | VCC | power_in | 5 V supply voltage for the CAN transceiver core and bus drivers. Recommended operating range 4.5 V to 5.5 V. Bypass locally with a ceramic capacitor. |
| 4 | RXD | output | CAN receive data output to the local protocol controller. Reports the bus state (low = dominant, high = recessive). Tri-state when powered off. IOL/IOH ±2 mA typ, 8 mA absolute max. |
| 5 | VIO | power_in | I/O level-shifter supply voltage (1.7 V to 5.5 V) that sets the logic level of TXD, RXD, and STB. Allows direct interface to 1.8 V / 2.5 V / 3.3 V / 5 V microcontrollers. On the non-'V' variant (TCAN1044-Q1) this pin is NC. |
| 6 | CANL | bidirectional | Low-level CAN differential bus input/output. Withstands ±58 V bus faults and ISO 7637 transients. Pair with CANH through the twisted-pair bus with termination. |
| 7 | CANH | bidirectional | High-level CAN differential bus input/output. Withstands ±58 V bus faults and ISO 7637 transients. Pair with CANL through the twisted-pair bus with termination. |
| 8 | STB | input | Standby mode control input with integrated pull-up. Drive low for normal mode, high for low-power standby mode (wake-up capable). Logic level referenced to VIO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Comm/UART |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TCAN1044VDRQ1TCAN1044VDRQ1DDFRTCAN1044VDRQ1DDFRQ1TCAN1044VDRQ1DRBRTCAN1044VDRQ1DRBRQ1
CAD (KiCad official)
- Symbol:
TCAN1044VDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
77637416f54d9655, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).