component
DTC123JM
Public Made by Adomby adom
Changjing Digital Transistors, SOT-723. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDTC123JM
Changjing · Digital Transistors · SOT-723
DTC123JM from Changjing, in a SOT-723. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Base input of the built-in bias-resistor inverter; the datasheet limits the input voltage VIN to -5 V to +12 V (absolute maximum ratings). |
| 2 | GND | power_in | Ground reference pin for the device; the datasheet gives no separate voltage or current limit for this pin. |
| 3 | OUT | output | Collector output of the transistor; the datasheet limits output current IO to 100 mA maximum and gives a typical on-state output voltage VO(on) of 0.1 V to 0.3 V at IO/II = 5 mA/0.25 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Changjing |
| Package | SOT-723 |
| Category | Transistors/Thyristors |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
DTC123JM - Footprint:
Package_TO_SOT_SMD:SOT-723 - 3D model: SOT-723, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.5 mm nominal SOT-723 height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
dtc123jm-etched.step/dtc123jm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dtc123jm.step/dtc123jm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Changjing datasheet (15 pp, sha256
87b8e288c3b9084b, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).