Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

WL117SC-1527

WL · RF Transceiver ICs · SOP-8

WL117SC-1527 from WL, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA4 bidirectional Programmable I/O pin PA4 as listed in the pin definition table; the datasheet gives no electrical limits or specific function for this pin.
2 VCC power_in Supply pin with an operating voltage range of +2.2 V to +3.6 V; if the supply can exceed 3.6 V, the datasheet requires a voltage regulator.
3 Paout output Power amplifier output, an open-drain output that connects to an external choke inductor and a π-type narrowband matching network to deliver output power above 10 dBm.
4 VSS power_in Ground pin.
5 XOUT output Reference output pin for the external crystal oscillator circuit, as listed in the pin definition table.
6 Xin input Reference input pin for the external crystal oscillator, which the chip uses during operation.
7 PA7 bidirectional Programmable I/O pin PA7 as listed in the pin definition table; the datasheet gives no electrical limits or specific function for this pin.
8 PA6 bidirectional Programmable I/O pin PA6 as listed in the pin definition table; the datasheet gives no electrical limits or specific function for this pin.

Key specifications

Parameter Value
Manufacturer WL
Package SOP-8
Category RF & Radio
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating supply voltage range 2.2 3.6 V 2
Operating temperature range -25 75 ℃ 2
Operating frequency range 300 450 MHz 2
Static current 1.5 uA 采用1KHz调制信号 2
Transmit (code-sending) current 8 13 mA 采用1KHz调制信号; 具体功耗与RF匹配参数有关 2
Output signal power 10 dBm 应用时采用π型窄带匹配网络 2
Encoding bit period (16CLK) 1320 uS 2

CAD (KiCad official)

  • Symbol: WL117SC-1527
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: wl117sc-1527-etched.step / wl117sc-1527-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); wl117sc-1527.step / wl117sc-1527.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: WL datasheet (5 pp, sha256 34cb15d125458187, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF