3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLS7366R
LSI/CSI · Counters, Dividers · DIP-14
LS7366R from LSI/CSI, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | fCKO | output | Crystal oscillator output; a crystal connected between fCKi and fCKO generates the basic filter clock for A, B and INDEX/ inputs in quadrature mode, with sink/source of about 4mA at VDD = 5V. |
| 2 | fCKi | input | Crystal/external clock input generating the filter clock for A, B and INDEX/ inputs in quadrature mode (divided by 2 if MDR0=1), and tied to a stable logic state in non-quadrature mode. |
| 3 | VSS | power_in | Ground reference for the device (VDD - VSS supply of 3V to 5.5V). |
| 4 | SS/ | input | Slave Select input; a high-to-low transition selects the device for serial transfer and a low-to-high transition ends transfer and puts MISO in high impedance. |
| 5 | SCK | input | Serial shift clock input supplied by the host processor for clocking data in on MOSI and out on MISO (slave mode only). |
| 6 | MISO | tri_state | Serial data output (MSB first) shifted out on SCK trailing edges, going to high impedance when SS/ is high so multiple slave outputs can be wire-ORed. |
| 7 | MOSI | input | Serial data input from the host processor, shifted in MSB first on the leading edges of SCK. |
| 8 | LFLAG/ | output | Programmable open-drain latched output flagging Carry, Borrow, Compare and INDEX, which is restored to high impedance only by clearing the STR and can be wired as a shared interrupt line. |
| 9 | DFLAG/ | output | Programmable push-pull instantaneous output that goes low on Carry, Borrow, Compare and INDEX conditions, configured through MDR1. |
| 10 | INDEX/ | input | Programmable index input (active low) from the encoder index output, configurable via MDR0 as LCNTR, RCNTR, LOTR or masked, in synchronous or asynchronous mode. |
| 11 | B | input | Quadrature clock input B from the incremental encoder, digitally filtered in quadrature mode and serving as the direction input in non-quadrature mode (high = up, low = down). |
| 12 | A | input | Quadrature clock input A from the incremental encoder, digitally filtered in quadrature mode and serving as the count input in non-quadrature mode. |
| 13 | CNT_EN | input | Counting enable input, with counting enabled when high and disabled when low, and an internal pull-up resistor. |
| 14 | VDD | power_in | Positive supply, 3.0V to 5.5V relative to VSS, with an absolute maximum of +7.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LSI/CSI |
| Package | DIP-14 |
| Category | Logic |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 5.5 | V | 5 | ||
| Supply Current | IDD | 300 | 400 | 450 | µA | VDD = 3.0V | 5 |
| Supply Current | IDD | 700 | 800 | 950 | µA | VDD = 5.0V | 5 |
| fCKi Logic high | VCH | 2.3 | V | VDD = 3.0V | 5 | ||
| fCKi Logic high | VCH | 3.7 | V | VDD = 5.0V | 5 | ||
| fCKi Logic Low | VCL | 0.7 | V | VDD = 3.0V | 5 | ||
| fCKi Logic Low | VCL | 1.3 | V | VDD = 5.0 | 5 | ||
| All other inputs, Logic High | VAH | 2.1 | V | VDD = 3.0V | 5 | ||
| All other inputs, Logic High | VAH | 3.5 | V | VDD = 5.0V | 5 | ||
| All other inputs, Logic Low | VAL | 0.5 | V | VDD = 3.0V | 5 | ||
| All other inputs, Logic Low | VAL | 1 | V | VDD = 5.0V | 5 | ||
| CNT_EN Low input current | IIEL | 3 | 5 | µA | VAL = 0.7V, VDD = 3.0V | 5 | |
| CNT_EN Low input current | IIEL | 10 | 15 | µA | VAL = 1.2V, VDD = 5.0V | 5 | |
| CNT_EN High input current | IIEH | 1 | 3 | µA | VAH = 1.9V, VDD = 3.0V | 5 | |
| CNT_EN High input current | IIEH | 6 | 9 | µA | VAH = 3.2V, VDD = 5.0V | 5 | |
| LFLAG, DFLAG Sink current | IOFL | -1.3 | -2 | mA | VOUT = 0.5V, VDD = 3.0V | 5 | |
| LFLAG, DFLAG Sink current | IOFL | -3.2 | -4 | mA | VOUT = 0.5V, VDD = 5.0V | 5 | |
| DFLAG Source current | IOFH | 1 | 1.8 | mA | VOUT = 2.5V, VDD = 3.0V | 5 | |
| DFLAG Source current | IOFH | 2.8 | 3.6 | mA | VOUT = 4.5V, VDD = 5.0V | 5 | |
| fCKO Sink current | IOCL | -1.3 | -2 | mA | VOUT = 0.5V, VDD = 3.0V | 5 | |
| fCKO Sink current | IOCL | -3.2 | -4 | mA | VOUT = 0.5V, VDD = 5.0V | 5 | |
| fCKO Source current | IOCH | 1.3 | 2 | mA | VOUT = 2.5V, VDD = 3.0V | 5 | |
| fCKO Source current | IOCH | 3.2 | 4 | mA | VOUT = 4.5V, VDD = 5.0V | 5 | |
| TXD/MISO Sink current | IOML | -1.5 | -2.4 | mA | VOUT = 0.5V, VDD = 3.0V | 5 | |
| TXD/MISO Sink current | IOML | -3.8 | -4.8 | mA | VOUT = 0.5V, VDD = 5.0V | 5 | |
| TXD/MISO Source current | IOMH | 1.5 | 2.4 | mA | VOUT = 2.5V, VDD = 3.0V | 5 | |
| TXD/MISO Source current | IOMH | 3.8 | 4.8 | mA | VOUT = 4.5V, VDD = 5.0V | 5 | |
| SCK High Pulse Width | tCH | 100 | ns | VDD = 5V ± 10% | 5 | ||
| SCK Low Pulse Width | tCL | 100 | ns | VDD = 5V ± 10% | 5 | ||
| SS/ Set Up Time | tCSL | 100 | ns | VDD = 5V ± 10% | 5 | ||
| SS/ Hold Time | tCSH | 100 | ns | VDD = 5V ± 10% | 5 | ||
| Inter Command SS/ high | tCSI | 100 | ns | VDD = 5V ± 10% | 5 | ||
| fCKI Frequency | fFCK | 40 | MHz | VDD = 5V ± 10% | 5 | ||
| Quadrature Clock frequency | fQA, fQB | 9.6 | MHz | VDD = 5V ± 10%, fQA = fQB < 1/4t3 | 5 | ||
| SCK High Pulse Width | tCH | 120 | ns | VDD = 3.3V ± 10% | 6 | ||
| SCK Low Pulse Width | tCL | 120 | ns | VDD = 3.3V ± 10% | 6 | ||
| SS/ Set Up Time | tCSL | 120 | ns | VDD = 3.3V ± 10% | 6 | ||
| SS/ Hold Time | tCSH | 120 | ns | VDD = 3.3V ± 10% | 6 | ||
| Inter Command SS/ high | tCSI | 120 | ns | VDD = 3.3V ± 10% | 6 | ||
| fCKI Frequency | fFCK | 20 | MHz | VDD = 3.3V ± 10% | 6 | ||
| Quadrature Clock frequency | fQA, fQB | 4.5 | MHz | VDD = 3.3V ± 10%, fQA = fQB < 1/4t3 | 6 | ||
| DC Supply Voltage | VDD | 7 | V | referenced to Vss | 4 | ||
| Input Voltage | VIN | -0.3 | V | Vss - 0.3 to VDD + 0.3 V | 4 | ||
| Operating Temperature | TA | -25 | 80 | °C | 4 | ||
| Storage Temperature | TSTG | 65 | 150 | °C | printed as 65 to +150 | 4 |
CAD (KiCad official)
- Symbol:
LS7366R - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
ls7366r-etched.step/ls7366r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ls7366r.step/ls7366r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LSI/CSI datasheet, copy hosted by LCSC (17 pp, sha256
51b1ffc0846b8ad0, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).