component
LM4951ASD
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM4951ASD
Texas Instruments · Audio Amplifiers · WSON-10-EP(4x4)
LM4951ASD from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Bypass | output | Half-supply reference voltage bypass output for power supply bypassing. |
| 2 | Shutdown | input | Active-low shutdown control signal; pulling low enters shutdown mode. |
| 3 | CCHG | output | Capacitor charge output to decrease turn-on time. |
| 4 | NC | unconnected | No connection to die; pin can be connected to any potential. |
| 5 | VIN | power_in | Single-ended signal input pin. |
| 6 | VO- | output | Inverting output of amplifier. |
| 7 | GND | power_in | Ground connection. |
| 8 | NC | unconnected | No connection to die; pin can be connected to any potential. |
| 9 | VDD | power_in | Power supply input. |
| 10 | VO+ | output | Non-inverting output of amplifier. |
| 11 | Exposed DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Amplifiers/Comparators |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM4951ASD - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm4951asd-etched.step/lm4951asd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4951asd.step/lm4951asd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
1a64bbe96db129c1, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).