Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TFPTL10L1000FL2B

Vishay / Dale · Sensors, Transducers · Radial

TFPTL10L1000FL2B from Vishay / Dale, in a Radial. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Tinned copper clad steel wire lead (d = 0.5 mm ±10 %, L = 25 mm min. in bulk) of the non-polarized nickel thin film PTC thermistor, with 2.5 mm ±0.8 mm lead spacing for the L2 straight-lead version.
2 2 passive Second tinned copper clad steel wire lead of the non-polarized thermistor, with 100 Ω ±1 % resistance at 25 °C, maximum rated power 75 mW at 70 °C and maximum working voltage 30 V for size L10.

Key specifications

Parameter Value
Manufacturer Vishay / Dale
Package Radial
Category Sensors, Transducers
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Tolerance on R25-value -1 1 % F = ±1 % (MPN tolerance code) 1
Tolerance on TCR at 25 °C -400 400 ppm/K at 25 °C; contact Vishay for closer TCR lot tolerance 1
Maximum working voltage RCWV RCWV 30 V TFPTL10; maximum working voltage or sqrt(P70×R), whichever is less 1
Maximum rated power at 70 °C P70 75 mW TFPTL10, at 70 °C 1
Resistance value at 25 °C R25 100 Ω MPN 1000 = 100 R 1
TCR at 25 °C TCR 4110 ppm/K at 25 °C 1
Dissipation factor δ δ 2.9 mW/K for information only; TFPTL10 1
Response time 1.1 s in oil; TFPTL10 1
Operating temperature range at rated power -55 70 °C at rated power 1
Operating temperature range at zero dissipation -55 150 °C at zero dissipation 1
Storage dry heat ΔR25/R25 ΔR25/R25 -0.25 0.25 % 5000 h at 125 °C 3
High temperature exposure ΔR25/R25 ΔR25/R25 -0.3 0.3 % 1000 h at 150 °C 3
Damp heat steady state, unloaded ΔR25/R25 ΔR25/R25 -0.2 0.2 % 1344 h at 40 °C/95 % RH 3
Thermal cycling ΔR25/R25 (100 cycles) ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 150 °C, 100 cycles 3
Thermal cycling ΔR25/R25 (1000 cycles) ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 125 °C, 1000 cycles 3
Short time overload ΔR25/R25 ΔR25/R25 -0.2 0.2 % 2.5 x P70 for 60 s at 70 °C 3
Long term dissipation ΔR25/R25 ΔR25/R25 -0.2 0.2 % 1000 h rated power at 70 °C 3
Resistance to soldering heat ΔR25/R25 ΔR25/R25 -0.25 0.25 % 10 s at 260 °C 3
Ratio tolerance R/R25 R/R25 -4 4 % low temp -55 °C, high temp +150 °C 4
Ratio tolerance R/R25 R/R25 -3 3 % low temp -40 °C, high temp +125 °C 4
Ratio tolerance R/R25 R/R25 -2 2 % low temp -20 °C, high temp +85 °C 4
Ratio tolerance R/R25 R/R25 -1 1 % low temp 0 °C, high temp +55 °C 4
Ratio tolerance R/R25 R/R25 -0.5 0.5 % low temp +12 °C, high temp +40 °C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts steel clad steel wire leads. 1

CAD (Adom-generated)

  • Symbol: TFPTL10L1000FL2B
  • Footprint: Adom_Gen:Vishay_Dale_TFPTL10
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tfptl10l1000fl2b-etched.step / tfptl10l1000fl2b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tfptl10l1000fl2b.step / tfptl10l1000fl2b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay / Dale datasheet (5 pp, sha256 37dbc9bf4db18bf0, retrieved 2026-11-03, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF