component
TMI6030C-28
Public Made by Adomby adom
TMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMI6030C-28
TMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23
TMI6030C-28 from TMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Signal ground of the LDO. |
| 2 | VOUT | power_out | Regulated output of the LDO (fixed 2.8V for the -28 variant); the device is stable with a 1µF ceramic output capacitor over the full 0mA to 300mA load range. |
| 3 | VIN | power_in | Input supply of the LDO, specified from 2.5V to 5.5V, with a 1µF ceramic input capacitor required between VIN and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.5 | 5.5 | V | 5 | ||
| Quiescent Current | IQ | 35 | 70 | μA | IOUT=0mA | 5 | |
| Power Supply Ripple Rejection | PSRR | 70 | dB | VIN=Vnom+1VP-P, f=1kHz, ILOAD=10mA | 5 | ||
| Output Voltage Accuracy | VOUT | -2 | 2 | % | VIN=VOUT+1V, IOUT=10mA | 5 | |
| Output Voltage Accuracy over temperature | VOUT | -3 | 3 | % | VIN=VOUT+1V, IOUT=10mA, TA=-40°C to +85°C | 5 | |
| Output Line Regulation | VLNR | 0.01 | 0.1 | %/V | VOUT+0.5V<VIN<5.5V, IOUT=10mA | 5 | |
| Output Load Regulation | VLDR | 3 | 6 | mV | 1mA<IOUT<300mA, VIN=VNOM+1.0V | 5 | |
| Dropout Voltage | VDROP | 320 | 350 | mV | IOUT=300mA (Applied for VOUT≥2.3V) | 5 | |
| Maximum Output Current | IOUTMAX | 300 | mA | 5 | |||
| Current Limit | Ilimit | 650 | mA | 5 | |||
| Output Short Current Limit | Ishort | 100 | mA | VOUT=0V | 5 | ||
| Thermal Shutdown Temperature | TSD | 160 | °C | No Load, VIN=5V | 5 | ||
| Thermal Shutdown Hysteresis | TSDHYS | 20 | °C | No Load, VIN=5V | 5 | ||
| VIN Input Voltage (absolute maximum) | VIN | -0.3 | 6 | V | 2 | ||
| VOUT Voltage Range (absolute maximum) | VOUT | -0.3 | V | Maximum printed as (VIN+0.3) | 2 | ||
| Junction Temperature (absolute maximum) | TJ | 160 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature Soldering | 260 | °C | 10 s | 2 | |||
| ESD Human Body Model | VESD_HBM | -2000 | 2000 | V | JEDEC JS-001, all pins | 2 | |
| ESD Charged Device Model | VESD_CDM | -2000 | 2000 | V | all pins | 2 | |
| Junction-to-ambient Thermal Resistance | 260 | °C/W | SOT23 package | 2 | |||
| Junction-to-case (top) Thermal Resistance | 82 | °C/W | 2 | ||||
| Voltage Range IN (recommended) | VIN | 2.5 | 5.5 | V | 2 | ||
| Operation Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Operation Ambient Temperature | TA | -40 | 85 | °C | 2 |
CAD (KiCad official)
- Symbol:
TMI6030C-28 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
tmi6030c-28-etched.step/tmi6030c-28-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi6030c-28.step/tmi6030c-28.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (10 pp, sha256
325a07d41159a80e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).