component
TPS3851G30SQDRBRQ1
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS3851G30SQDRBRQ1
Texas Instruments · Supervisor And Reset ICs · SON-8-EP(3x3)
TPS3851G30SQDRBRQ1 from Texas Instruments, in a SON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage pin with an operating range of 1.6 V to 6.5 V; a 0.1 µF bypass capacitor is recommended for noisy systems. |
| 2 | CWD | input | Programmable watchdog timeout input: a capacitor to GND sets the timeout, while a 10 kΩ pull-up to VDD or leaving the pin unconnected selects the factory-programmed timeout. |
| 3 | MR | input | Manual reset input: a logic low triggers RESET, the pin is internally pulled up, and RESET stays low for tRST after MR returns high. |
| 4 | GND | power_in | Ground reference pin; the thermal pad is internally connected to GND and should be tied to a large ground plane. |
| 5 | SET1 | input | Logic input: pulling SET1 to GND disables the watchdog timer, and together with CWD it selects the watchdog timeout option. |
| 6 | WDI | input | Watchdog input: a falling edge must occur before the watchdog timeout tWD expires, and WDI must be driven to VDD or GND when the watchdog is disabled. |
| 7 | WDO | output | Watchdog output, open-drain: connect a 1 kΩ to 100 kΩ pull-up to VPU; it goes low on a watchdog timeout and is high impedance while RESET is asserted. |
| 8 | RESET | output | Reset output, open-drain: connect a 1 kΩ to 100 kΩ pull-up to VPU; it goes low when VDD falls below VITN and stays low for tRST after VDD rises above VITN + VHYST. |
| 9 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SON-8-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS3851G30SQDRBRQ1 - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: SON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps3851g30sqdrbrq1-etched.step/tps3851g30sqdrbrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3851g30sqdrbrq1.step/tps3851g30sqdrbrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
187a2d3c4a847f7d, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).