component
TPS61043DRBT
Public Made by Adomby adom
Texas Instruments LED Drivers, VSON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS61043DRBT
Texas Instruments · LED Drivers · VSON-8-EP(3x3)
TPS61043DRBT from Texas Instruments, in a VSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LED | input | Input of the internal LED switch (Q2) to which the LEDs connect, with V(LED) limited to 30 V maximum. |
| 2 | RS | output | Output of the internal LED switch where the sense resistor that programs LED current connects, with FB regulating the voltage across RS to 252 mV typical. |
| 3 | VIN | power_in | Input supply pin, operating from 1.8 V to 6 V with an absolute maximum of 7 V. |
| 4 | FB | input | Feedback pin that regulates the voltage across the sense resistor RS to 252 mV. |
| 5 | CTRL | input | Combined enable and PWM control pin: CTRL high (1.3 V minimum) enables the device, CTRL low (0.3 V maximum) disables it, and PWM signals of 100 Hz to 50 kHz set brightness. |
| 6 | GND | power_in | Ground pin, which is also connected to the exposed thermal die pad. |
| 7 | OVP | input | Overvoltage protection pin connected to the converter output capacitor, with V(OVP) limited to 30 V maximum. |
| 8 | SW | input | Drain of the integrated power switch (Q1), with a maximum switch voltage of 30 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSON-8-EP(3x3) |
| Category | LED Drivers |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS61043DRBT - Footprint:
Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm - 3D model: VSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps61043drbt-etched.step/tps61043drbt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61043drbt.step/tps61043drbt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
e356a11cc09669ff, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).