component
TLE2071AIDR
Public Made by Adomby adom
Texas Instruments FET Input Amplifiers, SOIC-8. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLE2071AIDR
Texas Instruments · FET Input Amplifiers · SOIC-8
TLE2071AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Marked NC in the D/P package pin figure; the datasheet gives no function for this pin. |
| 2 | 1IN- | input | Inverting input; input current is limited to ±1 mA and the common-mode range is (V-) - 0.5 V to (V+) + 0.5 V per the absolute maximum ratings. |
| 3 | 1IN+ | input | Non-inverting input; input current is limited to ±1 mA and the common-mode range is (V-) - 0.5 V to (V+) + 0.5 V per the absolute maximum ratings. |
| 4 | VCC- | power_in | Negative supply rail (V-); total supply voltage VS = (V+) - (V-) is rated at a maximum of 38 V. |
| 5 | NC | unconnected | Marked NC in the D/P package pin figure; the datasheet gives no function for this pin. |
| 6 | OUT | output | Amplifier output; continuous output current is rated in the absolute maximum ratings, and the output can be shorted to either supply with unlimited duration at or below 25°C if dissipation limits are respected. |
| 7 | VCC+ | power_in | Positive supply rail (V+); total supply voltage VS = (V+) - (V-) is rated at a maximum of 38 V. |
| 8 | NC | unconnected | Marked NC in the D/P package pin figure; the datasheet gives no function for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25°C) | VIO | 0.3 | 2 | mV | VCC± = ±5V; VIC = 0, RS = 50Ω, VO = 0; 25°C | 12 | |
| Input offset voltage (full range) | VIO | 5.6 | mV | VCC± = ±5V; VIC = 0, RS = 50Ω, VO = 0; full range | 12 | ||
| Temperature coefficient of input offset voltage (full range) | aVIO | 3.2 | 29 | μV/°C | VCC± = ±5V; full range | 12 | |
| Input offset current (25°C) | IIO | 5 | 100 | pA | VCC± = ±5V; VIC = 0, VO = 0; 25°C | 12 | |
| Input offset current (full range) | IIO | 5 | nA | VCC± = ±5V; VIC = 0, VO = 0; full range | 12 | ||
| Input bias current (25°C) | IIB | 15 | 175 | pA | VCC± = ±5V; 25°C | 12 | |
| Input bias current (full range) | IIB | 10 | nA | VCC± = ±5V; full range | 12 | ||
| Common-mode input voltage range (25°C) | VICR | -1.9 | 5 | V | VCC± = ±5V; RS = 50Ω; 25°C | 12 | |
| Common-mode input voltage range (full range) | VICR | -0.8 | 5 | V | VCC± = ±5V; RS = 50Ω; full range | 12 | |
| Maximum positive peak output voltage swing | VOM+ | 3.8 | 4.985 | V | VCC± = ±5V; IO = −200mA; 25°C | 12 | |
| Maximum positive peak output voltage swing | VOM+ | 3.5 | 4.925 | V | VCC± = ±5V; IO = −2mA; 25°C | 12 | |
| Maximum positive peak output voltage swing | VOM+ | 1.5 | 4.5 | V | VCC± = ±5V; IO = −20mA; 25°C | 12 | |
| Maximum negative peak output voltage swing | VOM− | -3.8 | -4.985 | V | VCC± = ±5V; IO = 200mA; 25°C | 12 | |
| Maximum negative peak output voltage swing | VOM− | -3.5 | -4.925 | V | VCC± = ±5V; IO = 2mA; 25°C | 12 | |
| Maximum negative peak output voltage swing | VOM− | -1.5 | -4.5 | V | VCC± = ±5V; IO = 20mA; 25°C | 12 | |
| Large-signal differential voltage amplification | AVD | 80 | 91 | dB | VCC± = ±5V; RL = 600Ω; 25°C | 12 | |
| Large-signal differential voltage amplification | AVD | 90 | 100 | dB | VCC± = ±5V; RL = 2kΩ; 25°C | 12 | |
| Large-signal differential voltage amplification | AVD | 95 | 106 | dB | VCC± = ±5V; RL = 10kΩ; 25°C | 12 | |
| Supply-voltage rejection ratio (ΔVCC±/ΔVIO) | kSVR | 82 | 99 | dB | VCC± = ±5V to ±15V; VO = 0, RS = 50Ω; 25°C | 12 | |
| Supply current (per channel) | ICC | 1.35 | 2.48 | 2.92 | mA | VCC± = ±5V; VO = 0, no load; 25°C | 12 |
| Short-circuit output current | IOS | -65 | 65 | mA | 25°C | 12 | |
| Input offset voltage (25°C) | VIO | 0.47 | 2 | mV | VCC± = ±15V; VIC = 0, RS = 50Ω, VO = 0; 25°C | 14 | |
| Input offset voltage (full range) | VIO | 5.6 | mV | VCC± = ±15V; VIC = 0, RS = 50Ω, VO = 0; full range | 14 | ||
| Temperature coefficient of input offset voltage (full range) | aVIO | 3.2 | 29 | μV/°C | VCC± = ±15V; full range | 14 | |
| Input offset current (25°C) | IIO | 6 | 100 | pA | VCC± = ±15V; VIC = 0, VO = 0; 25°C | 14 | |
| Input offset current (full range) | IIO | 5 | nA | VCC± = ±15V; VIC = 0, VO = 0; full range | 14 | ||
| Input bias current (25°C) | IIB | 20 | 175 | pA | VCC± = ±15V; 25°C | 14 | |
| Input bias current (full range) | IIB | 10 | nA | VCC± = ±15V; full range | 14 | ||
| Common-mode input voltage range (25°C) | VICR | -11.9 | 15 | V | VCC± = ±15V; RS = 50Ω; 25°C | 14 | |
| Common-mode input voltage range (full range) | VICR | -10.8 | 15 | V | VCC± = ±15V; RS = 50Ω; full range | 14 | |
| Maximum positive peak output voltage swing | VOM+ | 13.8 | 14.985 | V | VCC± = ±15V; IO = −200mA; 25°C | 14 | |
| Maximum positive peak output voltage swing | VOM+ | 13.5 | 14.925 | V | VCC± = ±15V; IO = −2mA; 25°C | 14 | |
| Maximum positive peak output voltage swing | VOM+ | 11.5 | 14.5 | V | VCC± = ±15V; IO = −20mA; 25°C | 14 | |
| Maximum negative peak output voltage swing | VOM− | -13.8 | -14.985 | V | VCC± = ±15V; IO = 200mA; 25°C | 14 | |
| Maximum negative peak output voltage swing | VOM− | -13.5 | -14.925 | V | VCC± = ±15V; IO = 2mA; 25°C | 14 | |
| Maximum negative peak output voltage swing | VOM− | -11.5 | -14.5 | V | VCC± = ±15V; IO = 20mA; 25°C | 14 | |
| Large-signal differential voltage amplification | AVD | 80 | 96 | dB | VCC± = ±15V; RL = 600Ω; 25°C | 14 | |
| Large-signal differential voltage amplification | AVD | 90 | 109 | dB | VCC± = ±15V; RL = 2kΩ; 25°C | 14 | |
| Large-signal differential voltage amplification | AVD | 95 | 118 | dB | VCC± = ±15V; RL = 10kΩ; 25°C | 14 | |
| Common-mode rejection ratio | CMRR | 80 | 98 | dB | VCC± = ±15V; VIC = VICRmin, VO = 0, RS = 50Ω; 25°C | 14 | |
| Common-mode rejection ratio | CMRR | 79 | dB | VCC± = ±15V; VIC = VICRmin, VO = 0, RS = 50Ω; full range | 14 | ||
| Supply-voltage rejection ratio (ΔVCC±/ΔVIO) | kSVR | 82 | 99 | dB | VCC± = ±5V to ±15V; VO = 0, RS = 50Ω; 25°C | 14 | |
| Supply-voltage rejection ratio (ΔVCC±/ΔVIO) | kSVR | 80 | dB | VCC± = ±5V to ±15V; VO = 0, RS = 50Ω; full range | 14 | ||
| Supply current (per channel) | ICC | 1.35 | 2.48 | 2.92 | mA | VCC± = ±15V; VO = 0, no load; 25°C | 14 |
| Short-circuit output current | IOS | -65 | 65 | mA | VCC± = ±15V; 25°C | 14 | |
| Supply voltage (VCC±) | VCC± | 2.25 | 19 | V | I suffix | 8 | |
| Common-mode input voltage (VCC± = ±5V) | VIC | -0.8 | 5 | V | VCC± = ±5V; I suffix | 8 | |
| Common-mode input voltage (VCC± = ±15V) | VIC | -10.8 | 15 | V | VCC± = ±15V; I suffix | 8 | |
| Operating free-air temperature range | TA | -40 | 85 | °C | I suffix | 8 | |
| Supply voltage VCC+ (VS = (V+) − (V−)) | VCC+ | 0 | 38 | V | 7 | ||
| Input current (each input) | II | -1 | 1 | mA | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Package thermal impedance, D package | θJA | 97.1 | °C/W | D package | 7 |
CAD (KiCad official)
- Symbol:
TLE2071AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tle2071aidr-etched.step/tle2071aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle2071aidr.step/tle2071aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (79 pp, sha256
5c47b9f2c6963944, retrieved 2026-10-21, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).