3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC2863HS8-1#PBF
Analog Devices · RS-485/RS-422 ICs · SOIC-8
LTC2863HS8-1#PBF from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply, 3V < VCC < 5.5V; bypass with a 0.1µF ceramic capacitor to GND. |
| 2 | RO | output | Receiver output is high when A-B > 200mV and low when A-B < -200mV while RE is low, and goes high if the receiver inputs are open, shorted, or terminated without a signal. |
| 3 | DI | input | With the driver outputs enabled, a low on DI forces Y low and Z high, and a high on DI forces Y high and Z low. |
| 4 | GND | power_in | Ground. |
| 5 | Y | output | Noninverting driver output, high-impedance when the driver is disabled or unpowered. |
| 6 | Z | output | Inverting driver output, high-impedance when the driver is disabled or unpowered. |
| 7 | B | input | Inverting receiver input with impedance greater than 96kΩ in receive mode or when unpowered. |
| 8 | A | input | Noninverting receiver input with impedance greater than 96kΩ in receive mode or when unpowered. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LTC2863HS8-1#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ltc2863hs8-1-pbf-etched.step/ltc2863hs8-1-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2863hs8-1-pbf.step/ltc2863hs8-1-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
156a32e263226c9f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).