component
MSP430F2002IPWR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMSP430F2002IPWR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-14
MSP430F2002IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage for device operation; recommended operating range 1.8V to 3.6V. |
| 2 | P1.0/TACLK/ACLK/A0 | bidirectional | General-purpose I/O pin configurable as Timer_A clock input, ACLK output, or ADC10 analog input channel 0. |
| 3 | P1.1/TA0/A1 | bidirectional | General-purpose I/O pin configurable as Timer_A capture/compare input or ADC10 analog input channel 1. |
| 4 | P1.2/TA1/A2 | bidirectional | General-purpose I/O pin configurable as Timer_A capture/compare or ADC10 analog input channel 2. |
| 5 | P1.3/ADC10CLK/A3/VREF−/VeREF− | bidirectional | General-purpose I/O pin configurable as ADC10 conversion clock output, analog input A3, or negative reference voltage input/output. |
| 6 | P1.4/SMCLK/A4/VREF+/VeREF+/TCK | bidirectional | General-purpose I/O pin configurable as SMCLK output, ADC10 analog input A4, positive reference voltage input/output, or JTAG test clock. |
| 7 | P1.5/TA0/A5/SCLK/TMS | bidirectional | General-purpose I/O pin configurable as Timer_A compare output, ADC10 analog input A5, USI serial clock, or JTAG test mode select. |
| 8 | P1.6/TA1/A6/SDO/SCL/TDI/TCLK | bidirectional | General-purpose I/O pin configurable as Timer_A capture/compare, ADC10 analog input A6, USI serial data output or I2C clock, or JTAG test data input. |
| 9 | P1.7/A7/SDI/SDA/TDO/TDI | bidirectional | General-purpose I/O pin configurable as ADC10 analog input A7, USI serial data input or I2C data, or JTAG test data output/input. |
| 10 | RST/NMI/SBWTDIO | input | Reset or nonmaskable interrupt input; Spy-Bi-Wire test data input/output during programming; minimum pulse width 2 µs required for reset acceptance. |
| 11 | TEST/SBWTCK | input | Test mode select input for JTAG pins on Port 1; Spy-Bi-Wire test clock input during programming and testing; device protection fuse connection. |
| 12 | XOUT/P2.7 | bidirectional | Crystal oscillator output terminal or general-purpose I/O pin P2.7; excess current flows if used as input until P2SEL.7 is cleared. |
| 13 | XIN/P2.6/TA1 | bidirectional | Crystal oscillator input terminal supporting 32 kHz watch crystal, general-purpose I/O pin P2.6, or Timer_A compare output TA1. |
| 14 | VSS | power_in | Ground reference for device operation at 0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
MSP430F2002IPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
msp430f2002ipwr-etched.step/msp430f2002ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f2002ipwr.step/msp430f2002ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (104 pp, sha256
f41a8064a9540aa9, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).