3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18F26K22T-I/ML
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F26K22T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | Digital I/O (TTL) that also serves as comparator C2 noninverting input, analog input AN2, DAC reference output DACOUT and A/D reference voltage (low) input VREF-. |
| 2 | RA3/C1IN+/AN3/VREF+ | bidirectional | Digital I/O (TTL) that also serves as comparator C1 noninverting input, analog input AN3 and A/D reference voltage (high) input VREF+. |
| 3 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as CCP5 capture/compare/PWM 5, comparator C1 output C1OUT, SR latch Q output SRQ and Timer0 external clock input T0CKI. |
| 4 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | Digital I/O (TTL) that also serves as comparator C2 output C2OUT, SR latch Q-bar output SRNQ, MSSP1 SPI client select SS1, high/low-voltage detect input HLVDIN and analog input AN4. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RA7/CLKI/OSC1 | bidirectional | Digital I/O (TTL) that is disabled in external oscillator modes and otherwise serves as oscillator crystal input OSC1 or external clock input CLKI. |
| 7 | RA6/CLKO/OSC2 | bidirectional | Digital I/O (TTL) that is enabled in INTOSC modes when CLKO is not enabled and otherwise serves as CLKO (FOSC/4 in RC mode) or oscillator crystal output OSC2. |
| 8 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as Enhanced CCP2 PWM output P2B, Timer3 clock input T3CKI, Timer3 gate input T3G, Timer1 clock input T1CKI and secondary oscillator output SOSCO. |
| 9 | RC1/P2A/CCP2/SOSCI | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM 2 and secondary oscillator input SOSCI. |
| 10 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as CTMU pulse generator output CTPLS, Enhanced CCP1 PWM output P1A, CCP1 capture/compare/PWM 1, Timer5 clock input T5CKI and analog input AN14. |
| 11 | RC3/SCK1/SCL1/AN15 | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as MSSP1 SPI clock SCK1 or I2C clock SCL1 and analog input AN15. |
| 12 | RC4/SDI1/SDA1/AN16 | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as MSSP1 SPI data input SDI1, I2C data SDA1 and analog input AN16. |
| 13 | RC5/SDO1/AN17 | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as MSSP1 SPI data output SDO1 and analog input AN17. |
| 14 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM 3, EUSART asynchronous transmit TX1, EUSART synchronous clock CK1 and analog input AN18. |
| 15 | RC7/P3B/RX1/DT1/AN19 | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as Enhanced CCP3 PWM output P3B, EUSART asynchronous receive RX1, EUSART synchronous data DT1 and analog input AN19. |
| 16 | VSS | power_in | Ground reference for logic and I/O pins. |
| 17 | VDD | power_in | Positive supply for logic and I/O pins. |
| 18 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | Digital I/O (TTL) that also serves as external interrupt 0 INT0, CCP4 capture/compare/PWM 4, PWM fault input FLT0 for ECCP auto-shutdown, SR latch input SRI, MSSP2 SPI client select SS2 and analog input AN12. |
| 19 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | Digital I/O (TTL) that also serves as external interrupt 1 INT1, Enhanced CCP1 PWM output P1C, MSSP2 SPI clock SCK2 or I2C clock SCL2, comparator C1/C2 inverting input C12IN3- and analog input AN10. |
| 20 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | Digital I/O (TTL) that also serves as external interrupt 2 INT2, CTMU Edge 1 input CTED1, Enhanced CCP1 PWM output P1B, MSSP2 SPI data input SDI2 or I2C data SDA2 and analog input AN8. |
| 21 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | Digital I/O (TTL) that also serves as CTMU Edge 2 input CTED2, Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM 2, MSSP2 SPI data output SDO2, comparator C1/C2 inverting input C12IN2- and analog input AN9. |
| 22 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | Digital I/O (TTL) that also serves as interrupt-on-change pin IOC0, Enhanced CCP1 PWM output P1D, Timer5 external clock gate input T5G and analog input AN11. |
| 23 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | Digital I/O (TTL) that also serves as interrupt-on-change pin IOC1, Enhanced CCP2 PWM output P2B, Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM 3, Timer3 clock input T3CKI, Timer1 external clock gate input T1G and analog input AN13. |
| 24 | RB6/IOC2/TX2/CK2/PGC | bidirectional | Digital I/O (TTL) that also serves as interrupt-on-change pin IOC2, EUSART asynchronous transmit TX2, EUSART synchronous clock CK2 and in-circuit debugger/ICSP programming clock PGC. |
| 25 | RB7/IOC3/RX2/DT2/PGD | bidirectional | Digital I/O (TTL) that also serves as interrupt-on-change pin IOC3, EUSART asynchronous receive RX2, EUSART synchronous data DT2 and in-circuit debugger/ICSP programming data PGD. |
| 26 | RE3/VPP/MCLR | input | Input-only pin that acts as active-low master clear MCLR when MCLRE is set, or as digital input RE3 when MCLR is disabled, and also carries the programming voltage input VPP. |
| 27 | RA0/C12IN0-/AN0 | bidirectional | Digital I/O (TTL) that also serves as comparator C1/C2 inverting input C12IN0- and analog input AN0. |
| 28 | RA1/C12IN1-/AN1 | bidirectional | Digital I/O (TTL) that also serves as comparator C1/C2 inverting input C12IN1- and analog input AN1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 414 | |||
| Storage temperature | -65 | 150 | °C | 414 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | Max printed as (VDD + 0.3V); not computed | 414 | |||
| Voltage on VDD with respect to VSS, PIC18(L)F26K22 | VDD | -0.3 | 6.5 | V | PIC18(L)F26K22 | 414 | |
| Voltage on MCLR with respect to VSS | VMCLR | 0 | 11 | V | Note 2 | 414 | |
| Total power dissipation | 1 | W | Note 1 | 414 | |||
| Maximum current out of VSS pin | 300 | mA | -40°C to +85°C | 414 | |||
| Maximum current out of VSS pin | 125 | mA | +85°C to +125°C | 414 | |||
| Maximum current into VDD pin | 200 | mA | -40°C to +85°C | 414 | |||
| Maximum current into VDD pin | 85 | mA | +85°C to +125°C | 414 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 414 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 414 | ||
| Maximum current sunk by all ports | 200 | mA | -40°C to +85°C | 414 | |||
| Operating temperature | TA | -40 | 125 | °C | Standard Operating Conditions | 417 | |
| Supply Voltage (D001) | VDD | 2.3 | 5.5 | V | PIC18F2X/4XK22 | 417 | |
| RAM Data Retention Voltage (D002) | VDR | 1.5 | V | Note 1 | 417 | ||
| VDD Start Voltage to ensure internal Power-on Reset signal (D003) | VPOR | 0.7 | V | See section on Power-on Reset | 417 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal (D004) | SVDD | 0.05 | V/ms | See section on Power-on Reset | 417 | ||
| Brown-out Reset Voltage (D005) | VBOR | 1.75 | 1.9 | 2.05 | V | BORV<1:0> = 11 | 417 |
| Brown-out Reset Voltage (D005) | VBOR | 2.05 | 2.2 | 2.35 | V | BORV<1:0> = 10 | 417 |
| Brown-out Reset Voltage (D005) | VBOR | 2.35 | 2.5 | 2.65 | V | BORV<1:0> = 01 | 417 |
| Brown-out Reset Voltage (D005) | VBOR | 2.65 | 2.85 | 3.05 | V | BORV<1:0> = 00 | 417 |
| Power-down Base Current, Sleep mode (D006) | IPD | 12 | 35 | µA | 2.3V; WDT, BOR, FVR, SOSC disabled, all peripherals inactive; typ +25°C, max +125°C | 418 | |
| Power-down Base Current, Sleep mode (D006) | IPD | 13 | 40 | µA | 3.0V; WDT, BOR, FVR, SOSC disabled, all peripherals inactive; typ +25°C, max +125°C | 418 | |
| Power-down Base Current, Sleep mode (D006) | IPD | 13 | 50 | µA | 5.0V; WDT, BOR, FVR, SOSC disabled, all peripherals inactive; typ +25°C, max +125°C | 418 | |
| Watchdog Timer power-down module differential current (D007) | delta IPD | 0.35 | 5 | µA | 2.3V; typ +25°C, max +125°C | 418 | |
| Watchdog Timer power-down module differential current (D007) | delta IPD | 0.5 | 5 | µA | 3.0V; typ +25°C, max +125°C | 418 | |
| Brown-out Reset power-down module differential current (D008) | delta IPD | 3.4 | 16 | µA | 2.3V; typ +25°C, max +125°C | 418 | |
| Brown-out Reset power-down module differential current (D008) | delta IPD | 3.8 | 16 | µA | 3.0V; typ +25°C, max +125°C | 418 | |
| Brown-out Reset power-down module differential current (D008) | delta IPD | 5.2 | 16 | µA | 5.0V; typ +25°C, max +125°C | 418 | |
| High/Low Voltage Detect power-down module differential current (D010) | delta IPD | 2.1 | 15 | µA | 2.3V; typ +25°C, max +125°C | 418 | |
| High/Low Voltage Detect power-down module differential current (D010) | delta IPD | 2.4 | 15 | µA | 3.0V; typ +25°C, max +125°C | 418 | |
| High/Low Voltage Detect power-down module differential current (D010) | delta IPD | 3.2 | 15 | µA | 5.0V; typ +25°C, max +125°C | 418 | |
| Secondary Oscillator 32 kHz power-down module differential current (D011) | delta IPD | 0.5 | 10 | µA | 2.3V on SOSC 32 kHz; typ +25°C, max +125°C | 418 | |
| Secondary Oscillator 32 kHz power-down module differential current (D011) | delta IPD | 0.6 | 10 | µA | 3.0V on SOSC 32 kHz; typ +25°C, max +125°C | 418 | |
| A/D Converter differential current (D013) | 200 | 380 | µA | 2.3V; A/D on, not converting; typ +25°C, max +125°C | 419 | ||
| A/D Converter differential current (D013) | 210 | 400 | µA | 3.0V; A/D on, not converting; typ +25°C, max +125°C | 419 | ||
| A/D Converter differential current (D013) | 250 | 450 | µA | 5.0V; A/D on, not converting; typ +25°C, max +125°C | 419 | ||
| Comparators LP mode differential current (D015) | 7 | 18 | µA | 2.3V; LP mode; typ +25°C, max +125°C | 419 | ||
| Comparators LP mode differential current (D015) | 8 | 20 | µA | 5.0V; LP mode; typ +25°C, max +125°C | 419 | ||
| Comparators HP mode differential current (D016) | 39 | 95 | µA | 2.3V; HP mode; typ +25°C, max +125°C | 419 | ||
| Comparators HP mode differential current (D016) | 40 | 105 | µA | 3.0V; HP mode; typ +25°C, max +125°C | 419 | ||
| DAC differential current (D017) | 15 | 30 | µA | 2.3V; typ +25°C, max +125°C | 419 | ||
| DAC differential current (D017) | 20 | 35 | µA | 3.0V; typ +25°C, max +125°C | 419 | ||
| DAC differential current (D017) | 32 | 60 | µA | 5.0V; typ +25°C, max +125°C | 419 | ||
| FVR differential current (D018) | 28 | 45 | µA | 2.3V; typ +25°C, max +125°C | 419 | ||
| FVR differential current (D018) | 31 | 55 | µA | 3.0V; typ +25°C, max +125°C | 419 | ||
| FVR differential current (D018) | 66 | 100 | µA | 5.0V; typ +25°C, max +125°C | 419 |
CAD (KiCad official)
- Symbol:
PIC18F26K22T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic18f26k22t-i-etched.step/pic18f26k22t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26k22t-i.step/pic18f26k22t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
d0ba745eb6a13bdb, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F26K22T-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F26K22T-I/SO
- PIC18F26K22T-I/SS