3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTMCS1108A4BQDRQ1
Texas Instruments · Current Sensors · SOIC-8
TMCS1108A4BQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Input current positive pin; current flows through the internal 1.8-mΩ conductor between IN+ and IN-, with input voltage rated at -120 V to 120 V absolute maximum relative to GND. |
| 2 | IN+ | input | Input current positive pin (second pin, internally connected to pin 1); current flows through the internal 1.8-mΩ conductor between IN+ and IN-, with input voltage rated at -120 V to 120 V absolute maximum relative to GND. |
| 3 | IN- | input | Input current negative pin; current flows through the internal 1.8-mΩ conductor between IN+ and IN-, with input voltage rated at -120 V to 120 V absolute maximum relative to GND. |
| 4 | IN- | input | Input current negative pin (second pin, internally connected to pin 3); current flows through the internal 1.8-mΩ conductor between IN+ and IN-, with input voltage rated at -120 V to 120 V absolute maximum relative to GND. |
| 5 | GND | power_in | Analog ground; the reference for the input voltage limits and the zero-current output level of the device. |
| 6 | NC | unconnected | No connect; the pin can tolerate a capacitive or resistive connection to GND or VS (short to GND recommended if acceptable), with an input impedance of 1 MΩ over GND < VNC < VS. |
| 7 | VOUT | output | Analog output voltage proportional to input current, with absolute maximum range GND - 0.3 V to (VS) + 0.3 V. |
| 8 | VS | power_in | Analog power supply; operating supply range is 4.5 V to 5.5 V for the TMCS1108A4B/U-Q1 variant, with absolute maximum of GND - 0.3 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage, TMCS1108A4B/U-Q1 | VS | 4.5 | 5 | 5.5 | V | TMCS1108A4B/U-Q1 | 4 |
| Input voltage (IN+, IN-) recommended | VIN+,VIN- | -100 | 100 | VPK | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | 6 | V | Min printed as GND, 0.3 V (expression) | 4 | ||
| Junction temperature | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage, IN+ and IN- | VIN+,VIN- | -120 | 120 | V | 4 | ||
| Sensitivity error | -1.2 | 0.4 | 1.2 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 6 | |
| Sensitivity error, including lifetime and environmental drift | -1.8 | 0.7 | 1.8 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 6 | |
| Sensitivity error | -1.8 | 0.7 | 1.8 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC | 6 | |
| Sensitivity error | -2.25 | 0.9 | 2.25 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC | 6 | |
| Nonlinearity error | -0.5 | 0.5 | % | VOUT = 0.5 V to VS, 0.5 V | 6 | ||
| Output voltage offset error | VOE | -30 | 5 | 30 | mV | TMCS1108A4B-Q1 | 6 |
| Output voltage offset drift | -170 | 40 | 170 | µV/℃ | TMCS1108A4B-Q1, TA= -40ºC to +125ºC | 6 | |
| Offset error, RTI | IOS | -75 | 12.5 | 75 | mA | TMCS1108A4B-Q1 | 7 |
| Offset error temperature drift, RTI | -425 | 100 | 425 | µA/°C | TMCS1108A4B-Q1, TA= -40ºC to +125ºC | 7 | |
| Power-supply rejection ratio | PSRR | -6.5 | 1 | 6.5 | mV/V | TMCS1108A4B/U-Q1, VS = 4.5 V to 5.5 V, TA= -40ºC to +125ºC | 7 |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 8 | |||
| Swing to GND (VGND + offset) | 5 | 10 | mV | RL = 10 kΩ to GND, TA= -40ºC to +125ºC | 8 | ||
| Quiescent current | IQ | 4.5 | 5.5 | mA | TA = 25ºC | 8 | |
| Quiescent current | IQ | 6 | mA | TA = -40ºC to +125ºC | 8 | ||
| Allowable continuous RMS current | IIN,max | 30 | A | TA= 25ºC | 7 | ||
| Allowable continuous RMS current | IIN,max | 25 | A | TA= 85ºC | 7 | ||
| Allowable continuous RMS current | IIN,max | 22.5 | A | TA= 105ºC | 7 | ||
| Allowable continuous RMS current | IIN,max | 16 | A | TA= 125ºC | 7 | ||
| Maximum power dissipation (both sides) | PD | 673 | mW | VS = 5.5 V, TA = 125℃, TJ = 150℃, device soldered on TMCS1108EVM | 5 | ||
| Maximum power dissipation (current input, side-1) | PD1 | 640 | mW | IIN = 16 A; VS = 5.5 V, TA = 125℃, TJ = 150℃, device soldered on TMCS1108EVM | 5 | ||
| Maximum power dissipation by (side-2) | PD2 | 33 | mW | VS = 5.5 V, IQ = 6mA, no VOUT load | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 36.6 | °C/W | Device mounted on TMCS1108EVM (footnote 2) | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 50.7 | °C/W | Device mounted on TMCS1108EVM (footnote 2) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 9.6 | °C/W | Device mounted on TMCS1108EVM (footnote 2) | 5 | ||
| Junction-to-top characterization parameter | ΨJT | -0.1 | °C/W | Device mounted on TMCS1108EVM (footnote 2) | 5 | ||
| Junction-to-board characterization parameter | ΨJB | 11.7 | °C/W | Device mounted on TMCS1108EVM (footnote 2) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | path directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and | 30 |
CAD (KiCad official)
- Symbol:
TMCS1108A4BQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmcs1108a4bqdrq1-etched.step/tmcs1108a4bqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmcs1108a4bqdrq1.step/tmcs1108a4bqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
91bb1f805054db1c, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).