component
SN65LBC179P
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65LBC179P
Texas Instruments · RS-485 / RS-422 ICs · PDIP-8
SN65LBC179P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | 5 V supply pin, with a recommended supply range of 4.75 V to 5.25 V and an absolute maximum of 7 V. |
| 2 | R | output | RS-485 receiver logic output, rated for a high-level output current of -8 mA and a low-level output current of 8 mA, with an absolute maximum current of ±10 mA. |
| 3 | D | input | RS-485 driver logic input, requiring a high level of at least 2 V and a low level of at most 0.8 V. |
| 4 | GND | power_in | Ground reference for the device; all voltages are referenced to this pin. |
| 5 | Y | output | Non-inverting RS-485 bus driver output, with output current limited to ±250 mA short-circuit and bus voltage range of -7 V to 12 V. |
| 6 | Z | output | Inverted RS-485 bus driver output, with output current limited to ±250 mA short-circuit and bus voltage range of -7 V to 12 V. |
| 7 | B | input | Inverted RS-485 bus receiver input, with bus voltage range of -7 V to 12 V. |
| 8 | A | input | Non-inverting RS-485 bus receiver input, with bus voltage range of -7 V to 12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65LBC179P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
sn65lbc179p-etched.step/sn65lbc179p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lbc179p.step/sn65lbc179p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
7d3bfd61bb5629cb, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).