component
ESP32-C3FH4X
Public Made by Adomby adom
Espressif Systems RF and Wireless, 32-VFQFN Exposed Pad. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownESP32-C3FH4X
Espressif Systems · RF and Wireless · 32-VFQFN Exposed Pad
ESP32-C3FH4X from Espressif Systems, in a 32-VFQFN Exposed Pad. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LNA_IN | bidirectional | RF low-noise amplifier input/output signal pin. |
| 2 | VDD3P3 | power_in | Input supply for the analog power domain. |
| 3 | VDD3P3 | power_in | Input supply for the analog power domain. |
| 4 | XTAL_32K_P | bidirectional | Positive 32 kHz clock signal connected to the chip's crystal or oscillator; also selectable as GPIO0 and ADC1_CH0. |
| 5 | XTAL_32K_N | bidirectional | Negative 32 kHz clock signal connected to the chip's crystal or oscillator; also selectable as GPIO1 and ADC1_CH1. |
| 6 | GPIO2 | bidirectional | Strapping pin that must be at a defined level at startup; default drive strength 10 mA; also ADC1_CH2 and FSPIQ. |
| 7 | CHIP_EN | input | High enables the chip (powered up) and low disables it (powered down); do not leave this pin floating. |
| 8 | GPIO3 | bidirectional | General-purpose IO with default drive strength 10 mA; also ADC1_CH3. |
| 9 | MTMS | bidirectional | JTAG test mode select; also GPIO4 and ADC1_CH4; default drive strength 10 mA. |
| 10 | MTDI | bidirectional | JTAG test data input; also GPIO5 and ADC2_CH0; default drive strength 10 mA. |
| 11 | VDD3P3_RTC | power_in | Input supply for the RTC and part of the digital power domains, powering RTC IO pins. |
| 12 | MTCK | bidirectional | JTAG test clock; has a low-level glitch of about 5 ns during power-up. |
| 13 | MTDO | bidirectional | JTAG test data output; has a low-level glitch of about 5 ns during power-up. |
| 14 | GPIO8 | bidirectional | Strapping pin that must be at a defined level at startup. |
| 15 | GPIO9 | bidirectional | Strapping pin with internal weak pull-up enabled at reset. |
| 16 | GPIO10 | bidirectional | General-purpose IO with a low-level glitch of about 5 ns during power-up; also FSPICS0. |
| 17 | VDD3P3_CPU | power_in | Input supply for the digital power domain and digital IO pins. |
| 18 | VDD_SPI | power_out | Supplies in-package and off-package flash; can be reconfigured as a GPIO only if the flash is powered by an external supply. |
| 19 | NC | unconnected | Not bonded on ESP32-C3FH4X and labelled not connected (NC). |
| 20 | NC | unconnected | Not bonded on ESP32-C3FH4X and labelled not connected (NC). |
| 21 | NC | unconnected | Not bonded on ESP32-C3FH4X and labelled not connected (NC). |
| 22 | NC | unconnected | Not bonded on ESP32-C3FH4X and labelled not connected (NC). |
| 23 | NC | unconnected | Not bonded on ESP32-C3FH4X and labelled not connected (NC). |
| 24 | NC | unconnected | Not bonded on ESP32-C3FH4X and labelled not connected (NC). |
| 25 | GPIO18 | bidirectional | General-purpose IO and USB D- signal, with a high-level glitch of about 50000 ns during power-up and default drive strength 40 mA. |
| 26 | GPIO19 | bidirectional | General-purpose IO and USB D+ signal with USB pull-up by default; default drive strength 40 mA. |
| 27 | U0RXD | bidirectional | UART0 receive data with a low-level glitch of about 5 ns during power-up; IE and WPU enabled at reset. |
| 28 | U0TXD | bidirectional | UART0 transmit data; output enabled with weak pull-up at reset. |
| 29 | XTAL_N | passive | Differential negative external clock input/output connected to the chip's crystal or oscillator. |
| 30 | XTAL_P | passive | Differential positive external clock input/output connected to the chip's crystal or oscillator. |
| 31 | VDDA | power_in | Input supply for the analog power domain. |
| 32 | VDDA | power_in | Input supply for the analog power domain. |
| 33 | GND | power_in | External ground connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | 32-VFQFN Exposed Pad |
| Category | RF and Wireless |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Allowed input voltage (input power pins) | -0.3 | 3.6 | V | 54 | |||
| Cumulative IO output current | Ioutput | 1000 | mA | 54 | |||
| Storage temperature | TSTORE | -40 | 150 | °C | 54 | ||
| Recommended input voltage, VDDA, VDD3P3, VDD3P3_RTC | 3 | 3.3 | 3.6 | V | 54 | ||
| Recommended input voltage, VDD3P3_CPU | 3 | 3.3 | 3.6 | V | 54 | ||
| Recommended input voltage, VDD_SPI (as input) | 3 | 3.3 | 3.6 | V | 54 | ||
| Cumulative input current | IVDD | 0.5 | A | 54 | |||
| Recommended ambient temperature (ESP32-C3FH4X) | -40 | 105 | °C | 12 | |||
| Low-level input voltage | VIL | -0.3 | V | 55 | |||
| High-level input current | IIH | 50 | nA | 55 | |||
| Low-level input current | IIL | 50 | nA | 55 | |||
| Chip reset voltage (VIL_nRST) | VIL_nRST | -0.3 | V | CHIP_EN voltage is within the specified range | 55 | ||
| Differential nonlinearity (DNL) | DNL | -7 | 7 | LSB | ADC connected to an external 100 nF capacitor; DC signal input; Ambient temperature at 25 °C; Wi-Fi off | 56 | |
| Integral nonlinearity (INL) | INL | -12 | 12 | LSB | ADC connected to an external 100 nF capacitor; DC signal input; Ambient temperature at 25 °C; Wi-Fi off | 56 | |
| ADC sampling rate | 100 | kSPS | 56 | ||||
| ADC total error | -10 | 10 | mV | ATTEN0, effective measurement range of 0 ~ 750 | 56 | ||
| ADC total error | -35 | 35 | mV | ATTEN3, effective measurement range of 0 ~ 2500 | 56 | ||
| Center frequency of operating channel (Wi-Fi) | 2412 | 2484 | MHz | 59 | |||
| Center frequency of operating channel (Bluetooth LE) | 2402 | 2480 | MHz | 61 | |||
| TX EVM | -24.5 | -10 | dB | 802.11b, 1 Mbps, @21 dBm | 59 | ||
| TX EVM | -25 | -10 | dB | 802.11b, 11 Mbps, @21 dBm | 59 | ||
| TX EVM | -23 | -5 | dB | 802.11g, 6 Mbps, @21 dBm | 59 | ||
| TX EVM | -27.5 | -25 | dB | 802.11g, 54 Mbps, @19 dBm | 59 | ||
| TX EVM | -22.5 | -5 | dB | 802.11n, HT20, MCS0, @20 dBm | 59 | ||
| TX EVM | -29 | -27 | dB | 802.11n, HT20, MCS7, @18.5 dBm | 60 | ||
| TX EVM | -22.5 | -5 | dB | 802.11n, HT40, MCS0, @20 dBm | 60 | ||
| TX EVM | -28 | -27 | dB | 802.11n, HT40, MCS7, @18.5 dBm | 60 | ||
| RF power control range (Bluetooth LE 1 Mbps) | -24 | 0 | 20 | dBm | 61 | ||
| RF power control range (Bluetooth LE 2 Mbps) | -24 | 0 | 20 | dBm | 62 | ||
| RF power control range (Bluetooth LE 125 Kbps) | -24 | 0 | 20 | dBm | 62 | ||
| RF power control range (Bluetooth LE 500 Kbps) | -24 | 0 | 20 | dBm | 63 | ||
| Power supply voltage (3.3 V), in-package flash | VCC | 2.7 | 3.3 | 3.6 | V | 57 | |
| Maximum clock frequency, in-package flash | FC | 80 | MHz | 57 | |||
| Program/erase cycles, in-package flash | 100000 | cycles | 57 | ||||
| Data retention time, in-package flash | TRET | 20 | years | 57 | |||
| Page program time | TPP | 0.8 | 5 | ms | 57 | ||
| Sector erase time (4 KB) | TSE | 70 | 500 | ms | 57 | ||
| Block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 57 | ||
| Block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 57 | ||
| Chip erase time (32 Mb) | TCE | 20 | 60 | s | 57 | ||
| ESD HBM rating | -2000 | 2000 | V | Human Body Mode (HBM), JS-001 | 58 | ||
| ESD CDM rating | -1000 | 1000 | V | Charge Device Mode (CDM), JS-002 | 58 | ||
| Latch-up current trigger | -200 | 200 | mA | Current trigger, JESD78 | 58 |
CAD (KiCad official)
- Symbol:
ESP32-C3FH4X - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm - 3D model: 32-VFQFN Exposed Pad (KiCad packages3D, STEP)
- 3D model files:
esp32-c3fh4x-etched.step/esp32-c3fh4x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c3fh4x.step/esp32-c3fh4x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (76 pp, sha256
833fc000b4b3c3d3, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).