Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF5020MDREP

Texas Instruments · Voltage References · SOIC-8

REF5020MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do not connect; this pin must be left unconnected.
2 VIN power_in Power supply voltage, range from VOUT + 0.2 V up to 18 V, with a recommended bypass capacitor from 1 µF up to 10 µF.
3 TEMP output Temperature monitoring pin provides a temperature-dependent voltage output with approximately 60-kΩ source impedance.
4 GND power_in System ground.
5 TRIM/NR input Output adjustment and noise reduction input; connecting 1 µF to this pin creates a low-pass filter at the bandgap and reduces output noise.
6 VOUT output Very accurate, factory-trimmed voltage output, with a recommended bypass capacitor from 1 µF up to 50 µF with ESR between 1 and 1.5 Ω.
7 NC unconnected No internal connection.
8 DNC unconnected Do not connect; this pin must be left unconnected.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 2.048 V 2.7 V < VIN < 18 V, TA = 25°C 4
Initial Accuracy -0.05 0.05 % TA = 25°C 4
Output Voltage Accuracy Over Temperature -0.08 0.08 % TA = -55°C to 125°C 4
Output Voltage Noise 6 μVPP f = 0.1 Hz to 10 Hz 4
Output Voltage Temperature Drift dVOUT/dT 3 5 ppm/°C All other devices 5
Line Regulation dVOUT/dVIN 0.1 1 ppm/V REF5020, VIN = 2.7 V to 18V 5
Line Regulation Over Temperature dVOUT/dVIN 3 ppm/V Over Temperature 5
Load Regulation dVOUT/dILOAD 20 30 ppm/mA REF5020, -10 mA < ILOAD < +10 mA, VIN = 3 V 5
Load Regulation Over Temperature dVOUT/dILOAD 60 ppm/mA Over Temperature 5
Short-Circuit Current ISC 25 mA VOUT = 0 5
TEMP Pin Voltage Output 575 mV At TA = 25°C 5
TEMP Pin Temperature Sensitivity 2.64 mV/°C 5
Turnon Settling Time 200 μs To 0.1% with CL = 1 μF 5
Supply Voltage VIN 2.7 18 V For VOUT ≤ 2.5 V, minimum supply voltage is 2.7 V 5
Quiescent Current 0.8 1 mA 5
Quiescent Current Over Temperature 1.25 mA Over Temperature 5
Specified Temperature Range -55 125 °C 5
Operating Temperature Range -55 125 °C 5
Thermal Resistance θJA (electrical table) θJA 150 °C/W 5
Input voltage VIN 18 V 3
Output short-circuit 30 mA 3
Operating temperature -55 125 °C 3
Junction temperature TJ 150 °C 3
Storage temperature Tstg -65 150 °C 3
ESD HBM V(ESD) -3000 3000 V Human body model, ANSI/ESDA/JEDEC JS-001 3
ESD CDM V(ESD) -1000 1000 V Charged-device model, JESD22-C101 3
Input voltage (recommended) VIN 2.7 18 V VOUT + 0.2 V min; for VOUT ≤ 2.5 V min is 2.7 V 4
Output current IOUT -10 10 mA 4
Junction-to-ambient thermal resistance RθJA 97.1 °C/W D (SOIC) 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 42.2 °C/W D (SOIC) 8 pins 4
Junction-to-board thermal resistance RθJB 34.6 °C/W D (SOIC) 8 pins 4

CAD (KiCad official)

  • Symbol: REF5020MDREP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ref5020mdrep-etched.step / ref5020mdrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref5020mdrep.step / ref5020mdrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 08f0a34fd368f66b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF